Artikelilmiahs
Menampilkan 8.061-8.080 dari 48.903 item.
| # | Idartikelilmiah | NIM | Judul Artikel | Abstrak (Bhs. Indonesia) | Abtrak (Bhs. Inggris) | |
|---|---|---|---|---|---|---|
| 8061 | 8738 | D1F012003 | PEMANFAATAN LIMBAH IKAN TONGKOL DIHIDROLISIS ENZIM BROMELIN DAN POLLARD FERMENTASI SEBAGAI BAHAN BAKU KONSENTRAT DITINJAU DARI PRODUKSI DAN BOBOT TELUR PUYUH | ABSTRAK Penelitian ini bertujuan untuk mengetahui pengaruh pemanfaatan limbah ikan tongkol dihidrolisis dengan enzim bromelin dan pollard fermentasi terhadap produksi dan bobot telur puyuh. Penelitian dilakukan mulai tanggal 10 Maret sampai 5 Mei 2014 di Experimental Farm Fakultas Peternakan Universitas Jenderal Soedirman Purwokerto. Materi penelitian menggunakan 100 ekor puyuh petelur umur 4 minggu, dengan bahan pakan yang digunakan yaitu, konsentrat pabrik, limbah ikan tongkol dan pollard fermentasi, dedak, jagung giling dan mineral mix. Metode penelitian adalah eksperimental in vivo menggunakan Rancangan Acak Lengkap (RAL) dengan 4 perlakuan dan 5 ulangan, yaitu R0 (Limbah ikan tongkol dan pollard fermentasi 0%), perlakuan R1 (limbah ikan tongkol hidrolisis dan pollard fermentasi 10%), perlakuan R2 (limbah ikan tongkol hidrolisis dan pollard fermentasi 20%), dan perlakuan R3 (limbah ikan tongkol hidrolisis dan pollard fermentasi 30%). Data dianalisis dengan analisis variansi. Hasil analisis variansi menunjukkan bahwa perlakuan berpengaruh tidak nyata (P>0.05) terhadap produksi dan bobot telur puyuh. Rataan persentase produksi 20,86±10,84 dan bobot telur 8.92 ± 0.41 g/butir. Kesimpulan penelitian ini adalah pemanfaatan limbah ikan tongkol yang dihidrolisis dengan enzim bromelin dan pollard fermentasi sampai level 30% menghasilkan produksi dan bobot telur puyuh umur 6 sampai 12 minnggu yang relatif sama. Kata Kunci : Limbah ikan tongkol hidrolisis, Pollard fermentasi, produksi dan bobot telur burung puyuh | ABSTRACT The aim of this research was to know the effect of tuna waste hydrolyzed by bromelain enzyme and fermented pollard on production and egg weight of quail. The research was conducted from March 10th until May 5th, 2014 at the Experimental Farm Faculty of Animal Husbandry Jenderal Soedirman University Purwokerto. The material which used in this research is 100 laying quails aged 4 weeks, the feed material used is, factories concentrated, tuna waste and 30% fermented pollard, bran, corn flour and mineral mix. The research method is experimental in vivo a completely randomized design (CRD) with 4 treatments and 5 replication are R0 (tuna waste hydrolyzed and pollard fermented 0%), R1 (waste tuna hydrolyzed and fermented pollard 10%), R2 (tuna waste hydrolyzed and fermented pollard 20%), and R3 (tuna waste hydrolized and pollard fermented 30%). Data were analyzed by analysis of variance. The analyzed of variance showed that the there was no significant (P> 0.05) on production and egg weight of quail. The average percentage of production 20,86 ± 10,84 and egg weight 8.92 ± 0.41 g / grain. These result indicates that utilization of tuna waste hydrolyzed by the enzyme bromelain and pollard fermented up to 30% level can not increase production and egg weight of quail ages 5 to 12 weeks. Key words : Waste tuna hydrolyzed, fermented Pollard, egg production and weight of quail | |
| 8062 | 10465 | A1H010066 | PERBAIKAN SISTEM PENGHISAP DEBU PADA MESIN PENGAMPELAS TEMPURUNG KELAPA TIPE CIRCLE DI UKM SOMACOCO DESA SOKAWERA KECAMATAN SOMAGEDE KABUPATEN BANYUMAS | Penelitian ini bertujuan untuk mengetahui banyaknya debu yang tertampung dan efisiensi dari alat pengampelas tempurung kelapa tipe circle setelah adanya penambahan sistem penghisap debu dan mengetahui energi yang dibutuhkan untuk melakukan proses pengampelasan tempurung kelapa. Penelitian ini menggunakan analisis deskriptif menggunakan 3 kali pengulangan dan 3 kali perlakuan dengan ukuran tempurung kelapa1( 9-9,5 cm), 2 (10-10,5 cm), 3 (11-11,5 cm). Pengampelasan dilakukan pada ketiga diameter tersebut dengan mesin pengampelas sebelum dan sesudah adanya perbaikan sitem penghisap debu. Kinerja perbaikan sistem penghisap debu pada mesin pengampelas tipe circle menghasilkan kapasitas pengampelasan pada diameter 1,2,3 dengan rata-rata sebesar 22 batok/jam, 20 batok/jam, 19 batok/jam, kebutuhan daya spesifik diameter 1,2,3 dengan rata-rata sebesar 0,0069 kWh/batok; 0,0075 kWh/batok; 0,0082 kWh/batok. Sebaran debu yang dihasilkan pada pengampelasan tempurung kelapa diameter 1 sebaran depan rata-rata 1,86 gram; kanan 7,32 gram; atas 12,57 gram dan tertampung 25,19 gram, pada diameter 2 sebaran depan 2,79 gram; kanan 7,56 gram; atas 7,93 gram dan tertampung 30,34 gram, pada diameter 3 sebaran depan 3,88 gram; kanan 9,16 gram; atas 18,78 gram dan tertampung 30,68 gram. Efisiensi rata-rata penggunaan energi listrik sebesar 92,96 % dan efisiensi penggunaan energi manusia sebesar 94,88 %. Analisis finansial pada mesin pengamepelas didapatkan nilai BEP sebesar 62 jam/tahun dan keuntungan yang didapatkan sebesar Rp. 2.236.918,-/bulan. Kata kunci: Tempurung kelapa, Mesin pengamplas, Barang kerajinan | This researched aiming to find out how much restrained ashes ,the eficiency from the circle type coconut shell sanding machine after ashes cleaner system added and the energy requierement to proceed coconut shell resurfacing. This research using descriptive analisys with 3treatment. Each treatment using 3 kind of treatment, which is 9-9.5 cm, 10-10.5 cm, and 11-11.5 cm diameters of coconut shell. Each treatment proceed with the sanding machine before and after ashes cleaner system have been repaired. The performance of repaired machine resulting the sanding capacity of each diameters in average of 22 shell/hours; 20 shell/hours; and 19 shell/hours, the specific power requirements of each diameters with average of 0.0069 kWh/Shell, 0.0075 kWh/Shell, and 0.0082 kWh/Shell. Distributions of dust produced in coconut shell sanding processes on diameter 1 with average distribution 1.86 grams front; 7.32 grams right; 12.57 grams top; and 25.19 grams restrained, diameter 2 with average distribution 2.79 grams front; 7.56 grams right; 7.93 grams top; and 30.34 grams restrained, with average distribution diameter 3 with 3.88 grams front; 9.16 grams right; 18.78 grams top; and 30.68 grams restrained. The average efficiency of electrical energy use by 92.96% and the efficieny use of human energy by 94.88%. Financial analysis on sanding machine obtained BEP values 62 hours/yearand the gains of Rp. 2,236,918,- / month. Keywords: Coconut shell, Sanding machine, Craft item | |
| 8063 | 8740 | D1E010154 | PEMANFAATAN LIMBAH IKAN TONGKOL DIHIDROLISIS DENGAN ENZIM BROMELIN DAN POLLARD FERMENTASI SEBAGAI BAHAN BAKU KONSENTRAT DITINJAU DARI KONSUMSI PAKAN DAN KONSUMSI AIR MINUM PUYUH | Penelitian ini bertujuan untuk mengetahui pengaruh pemanfaatan limbah ikan tongkol yang dihidrolisis dengan enzim bromelin dan pollard fermentasi terhadap konsumsi pakan dan konsumsi air minum puyuh. Penelitian dilaksanakan mulai tanggal 10 Maret sampai 5 Mei 2014 di Experimental Farm Fakultas Peternakan Universitas Jenderal Soedirman Purwokerto. Materi yang digunakan adalah 100 ekor puyuh (C. japonica) betina umur empat minggu. Penelitian dilakukan dengan metode eksperimental in vivo dan menggunakan Rancangan Acak Lengkap (RAL). Perlakuan yang diujicobakan terdiri atas R0 (limbah ikan tongkol hidrolisis dan pollard fermentasi 0%), R1 (limbah ikan tongkol hidrolisis dan pollard fermentasi 10%), R2 (limbah ikan tongkol hidrolisis dan pollard fermentasi 20%), dan R3 (limbah ikan tongkol hidrolisis dan pollard fermentasi 30%). Data dianalisis dengan analisis variansi. Hasil analisis variansi menunjukkan bahwa perlakuan berpengaruh tidak nyata (P>0,05) terhadap konsumsi pakan dan konsumsi air minum puyuh. Rataan konsumsi pakan dan konsumsi air minum puyuh keseluruhan adalah 19,27±1,24 g/ekor/hari dan 45±26,06 ml/ekor/hari. Kesimpulan penelitian ini adalah pemanfaatan limbah ikan tongkol dihidrolisis enzim bromelin dan pollard fermentasi sampai kadar 30% dapat menggatikan konsentrat pabrik tanpa mengurangi konsumsi pakan dan konsumsi air minum puyuh. | The aim of this research was to know the effect of tuna waste hydrolyzed by bromelain enzyme and fermented pollard on feed and water consumption of quail. The research was conducted from March 10th to May 5th 2014 at The Experimental Farm and Animal Feeding and Nutrition Laboratory Faculty of Animal Science Jenderal Soedirman University, Purwokerto. Material used were 100 female quails of four weeks old. This research was conducted by invivo experimental method and used Completely Randomized Design (CRD). Treatments used were R0 (tuna waste hydrolyzed by bromelain enzyme and fermented pollard 0%), R1 (tuna waste hydrolyzed by bromelain enzyme and fermented pollard 10%), R2 (tuna waste hydrolyzed by bromelain enzyme and fermented pollard 20%), and R3 (tuna waste hydrolizyd by bromelain enzyme and fermented pollard 30%). Data were analyzed by analysis of variance. The analysis of variance showed that there was non significant effect (P>0,05) of the treatments to feed and water consumption of quail. The average result of feed and water consumption of quail was 19,27±1,24 g/head/day and 19,27±1,24 g/head/day. These result indicates that utilization of tuna waste hydrolyzed by bromelain enzyme and fermented pollard at 30% can replace factory concentrate and did not increase feed and water consumption. | |
| 8064 | 10466 | A1H010034 | UJI PERFORMANSI TUNGKU TRADISIONAL IMPROVED BERBAHAN BAKAR SEKAM PADI DAN SERBUK KAYU LABAN DI DESA SIKAPAT KECAMATAN SUMBANG KABUPATEN BANYUMAS | Dalam proses produksi, penggunaan tungku dan jenis bahan bakar bertujuan untuk mempercepat proses produksi yang ada. Penggunaan tungku yang ada dimaksudkan mempercepat proses produksi gula, namun pada pengamatan di lokasi, tungku yang digunakan saat proses produksi banyak menimbulkan masalah seperti proses produksi gula lama dan gula menjadi kotor. Tujuan penelitian ini adalah untuk mengetahui waktu penyalaan awal, konsumsi bahan bakar dan mengetahui efisiensi tungku. Penelitian ini menggunakan 2 bahan bakar yaitu serbuk kayu laban dan sekam padi dengan kadar air masing-masing yaitu 11,15% dan 10,05%. Hasil penelitian tungku tradisional improved berbahan bakar serbuk laban untuk penyalaan awal memiliki rata-rata 38,87 detik, pembakaran 25 kg bahan bakar sampai habis memerlukan waktu 4 jam 30 menit, air yang digunakan sebanyak 50 liter, air yang teruapkan 28,8 liter. Percobaan penyalaan awal tungku dengan bahan bakar sekam padi memiliki waktu rat-rata 42,66 detik, pembakaran 25 kg bahan bakar sampai habis memerlukan waktu 3 jam 50 menit, air yang digunakan sebanyak 50 liter, air yang teruapkan sebanyak 23,4 liter. Nilai efisiensi pembakaran tungku tradisional improved berbahan bakar serbuk kayu laban yaitu 14,5% dan untuk sekam padi sebesar 10,66%. | During the production process , the use of a furnace and type of fuel aims to speed up the production process. The use of a furnace that there are intended accelerate the sugar production process, but on the observations in those locations a furnace used during the production process generated a lot of problems issues such as spent long time to production sugar and sugar into dirty. The purpose of this research are to know the ignition time, consumption of fuels and efficiency. This research used 2 fuel that is sawdust of laban and rice husk with each other wet base water content value 11.15% and 10.05%. The result of experiment improved traditional furnace with sawdust of laban igniting time is 38,87 seconds, the time of burning fuel 25 kg is 4 hour 30 minute for cooked 50 kg water which 28.8 kg of water to be aqueous vapor, and the efficiency value is 14,5%. The experiment with fuel of rice husk the igniting time 42,66 seconds, the time or burning fuel 25 kg is 3 hour 50 minute for cooked 50 kg water which 23.4 kg 0f water to be aqueous vapor, and the efficiency value is 10.66% | |
| 8065 | 11016 | B1J009129 | PENGGUNAAN BERBAGAI JENIS SERBUK GERGAJI KAYU UNTUK PRODUKSI Ganoderma sp. ISOLAT BANYUMAS 1 | Ganoderma sp. merupakan jamur dari kelas Basidiomycetes dan merupakan salah satu jamur makroskopis yang digolongkan ke dalam jamur berkhasiat obat (medicinal mushroom). Penelitian budidaya Ganoderma sp. belum banyak dilakukan, terlebih yang menggunakan isolat tempatan (indigenous). Serbuk gergaji kayu biasanya digunakan sebagai bahan dasar medium tanam. Penelitian dilakukan di Agro Jamur Pabuwaran, Purwokerto dengan tujuan untuk mengetahui pengaruh penggunaan ketiga serbuk kayu (sengon, mahoni dan karet) terhadap produktivitas jamur Ganoderma sp. isolat Banyumas 1 dan mengetahui jenis kayu manakah yang dapat memproduksi jamur Ganoderma sp. isolat Banyumas 1 yang paling baik. Penelitian menggunakan metode eksperimental dengan Rancangan Acak Lengkap (RAL). Data yang diperoleh dianalisis menggunakan Analisis Ragam (Uji F) pada tingkat kesalahan 5% dan 1%, dan dilanjutkan dengan Uji Beda Nyata Jujur pada tingkat kesalahan 5%.Berdasarkan hasil analisis variansi, penggunaan medium tanam dengan bahan dasar serbuk gergaji kayu sengon, mahoni dan karet berpengaruh sangat nyata terhadap produktivitas Ganoderma sp. isolat Banyumas 1 yang dilihat dari bobot segarnya. Perlakuan paling baik ditunjukkan pada perlakuan penggunaan serbuk gergaji kayu karet (K3) dengan rata-rata bobot segar jamur 18,9 g/baglog. Perlakuan terendah ditunjukkan pada perlakuan penggunaan serbuk gergaji kayu mahoni (K2) dengan rata-rata bobot segar jamur 10,6 g/baglog. | Ganoderma sp. is fungus of the subdivisi on Basidiomycetes and is one macroscopic fungi classified into medicinal mushrooms (medicinal mushroom). Research the medicinal mushroom cultivation in Indonesian has not been done up to that use by local isolates (indigenous). Sawdust is usually used as the base material of the embedding media. This research was done at Agro Jamur Pabuwaran, Purwokerto in order to determine the effect of using sawdust third (falcata, mahogany and rubber) on the production of Ganodermasp. Banyumas isolates 1 and determine which of kind of wood can producing of Ganoderma sp. Banyumas isolates 1 of the most good. This study used an experimental design with completely randomized design (CRD). Data were analyzed using Analysis Of Variance (Test F) on error rate of 5% and 1%, and continued with Honestly Significant Difference test at 5% error rate. The results showed that the use of different types of wood as a media mushroom growing influence on the productivity of Ganoderma sp. isolates Banyumas 1. based on the results of the analysis of variance, using the embedding media with a basis of sawdust falcata, mahogany and rubber very significant effect on the productivity of Ganoderma sp. isolates Banyumas 1 as seen from the fresh weight. The best treatment is indicated in the treatment of the use of rubber wood sawdust (K3) with an average weight fresh mushrooms of 18.9 g/baglog. Lowest treatment is indicated in the treatment of the use of sawdust mahogany (K2) with an average weight fresh mushrooms of 10.6 g/baglog. | |
| 8066 | 11689 | G1F011050 | EFEK ANALGETIK KOMBINASI EKSTRAK COCOR BEBEK (Bryophyllum pinnatum) DAN TEMULAWAK (Curcum xanthorrhiza) PADA MENCIT JANTAN YANG DIINDUKSI FORMALIN | Cocor bebek (Bryophyllum pinnatum) dan temulawak (Curcuma xanthorrhiza) merupakan tanaman yang telah terbukti memiliki aktivitas analgetik. Tujuan penelitian ini adalah untuk mengetahui aktivitas analgetik dari kombinasi ekstrak daun cocor bebek dan rimpang temulawak terhadap mencit balb/c jantan yang diinduksi formalin. Metode penelitian menggunakan Rancangan Acak Lengkap (RAL), dimana setiap kelompok terdiri dari 5 ekor mencit, dengan ekstrak daun cocor bebek dan rimpang temulawak sebagai sediaan uji dan aspirin sebagai kontrol positif. Pengujian aktivitas analgetik dilakukan menggunakan dosis 200 mg/kgBB dengan perbandingan ekstrak daun cocor bebek dan rimpang temulawak 100:0; 75:25; 50:50; 25:75; dan 0:100. Parameter yang diamati adalah licking time pada early phase (0-5 menit) dan late phase (15-30 menit). Data kumulatif licking time digunakan untuk menghitung persentase daya analgetik. Data licking time dianalisis menggunakan analisis statistika ANOVA satu arah, kemudian dilanjutkan dengan uji LSD untuk mengetahui perbedaan pasangan perilaku antar kelompok perlakuan. Hasil penelitian menunjukkan bahwa kelompok yang diberi ekstrak daun cocor bebek dan rimpang temulawak dengan perbandingan 100:0; 75:25; 50:50; 25:75; dan 0:100 masing-masing memiliki efek analgetik dengan persentase daya analgetik pada early phase sebesar 67,03%; 19,23%; 28,02%; 14,28%; dan 24,17%, sedangkan pada late phase sebesar 86,61%; 35,03%; 84,25%; 59,05%; dan 47,63%. Hasil tersebut menunjukkan bahwa kelompok yang memiliki daya analgetik terbesar pada early phase dan late phase adalah sediaan uji dengan perbandingan 100:0. Hasil ini mengindikasikan bahwa ekstrak cocor bebek dengan dosis 200 mg/kg BB secara tunggal memiliki aktivitas analgetik yang lebih baik daripada kombinasi dengan temulawak. | Cocor bebek (Bryophyllum pinnatum) and curcuma (Curcuma xanthorrhiza) are plants that have been shown to have analgesic activity. The purpose of this study was to determine the analgesic activity from the combination of cocor bebek and curcuma extract on balb/c male mice after formalin induced. The study method used completely randomized design (CRD), where each group consists of 5 mice, with combination of cocor bebek and curcuma extract as a sample and aspirin as a positive control. Analgesic activity test was conducted using a dose of 200 mg / kgBB in the ratio of cocor bebek and curcuma extract 100: 0; 75: 25; 50:50; 25:75; and 0:100. Parameters measured were licking time in the early phase (0-5 min) and late phase (15-30 min). The licking time data used to calculate the percentage of analgesic and for statistical analysis used one-way ANOVA, followed by LSD test to determine differences between each intervention groups. The results showed that the group given combination of cocor bebek and curcuma extract with a ratio of 100: 0; 75:25; 50:50; 25:75; and 0: 100, have an analgesic effect with the percentage of analgesics in the early phase which are 67.03%; 19.23%; 28.02%; 14.28%; and 24.17%, while in the late phase are 86.61%; 35.03%; 84.25%; 59.05%; and 47.63%. It showed that the group that has the greatest analgesic activity in early phase and late phase is the combination of cocor bebek and curcuma extract with a ratio of 100: 0. These results indicate that cocor bebek extract at a dose of 200 mg / kgBB singly has analgesic activity better than combined with curcuma. | |
| 8067 | 11577 | H1B009013 | PENERAPAN ODDS RATIO DAN REGRESI LOGISTIK PADA DATA TABEL KONTINGENSI | Penelitian ini mempelajari tentang relative risk (RR), odds ratio (OR) dan regresi logistik 3×2 dan 3×3. Data yang digunakan adalah tentang pengaruh tingkat pendidikan terhadap pemilihan kebijakan merokok. Analisis dilakukan menggunakan bantuan software SPSS 16.0 dan interpretasinya mengacu pada formulasi teori. Hasil yang didapatkan berupa model dan nilai RR>1. Berdasarkan nilai dan model regresi logistik tersebut diperoleh interpretasi bahwa pria yang berpendidikan perguruan tinggi cenderung mendukung kebijakan tidak merokok daripada yang lainnya. | The research studied the relative risk ( RR ), odds ratio (OR) and logistic regression for contingency tables 3×2 and 3×3 . The data are about the effect of educational level on election in smoking policy. The analysis was performed using SPSS 16.0 and the interpretation refers to the theory. The result are and . Based on the results, it means that men with high school education more support to the no smoking policies than the others. | |
| 8068 | 8742 | G1G009048 | KARAKTERISASI ZIRKONIA ALUMINA SILIKA- METAKAOLIN DENGAN KITOSAN SEBAGAI COUPLING AGENT YANG DIIMPREGNASI PMMA- APATITE UNTUK MATERIAL DENTAL IMPLANT | Dental implant adalah gigi tiruan yang dipasang ke dalam mulut pasien melalui tindakan pembedahan sehingga gigi tiruan ini tertanam ke dalam tulang rahang. Salah satu pemanfaatan kekayaan alam Indonesia yang potensial untuk dikembangkan sebagai material dental implant adalah zirkonia. Penelitian ini bertujuan untuk mendeskripsikan karakteristik morfologi, kekerasan dan modulus elastisitas zirkonia alumina silika- metakaolin dengan kitosan sebagai coupling agent yang diimpregnasi PMMA- apatit. Jenis penelitian ini adalah eksperimental laboratories. Hasil penelitian menunjukkan karakteristik morfologi pada sampel terdapat rongga pori yang belum terdistribusi dengan baik dan ukuran rongga pori yang bervariasi. Nilai kekerasan yang dimiliki sampel adalah 20,87 VHN, sedangkan nilai modulus elastisitas sampel adalah 194,39 Mpa. Simpulan penelitian ini adalah karakteristik morfologi zirkonia alumina silika- metakaolin dengan kitosan yang diimpregnasi PMMA- apatit mempunyai rongga pori yang bervariasi dan belum terdisitribusi dengan baik. Nilai kekerasan yang didapat masih belum mendekati nilai kekerasan dentin, artinya hasil penelitian belum dapat diaplikasikan. Nilai modulus elastisitas yang didapat belum mendekati nilai modulus elastisitas tulang, sehingga belum memenuhi syarat sebagai material dental implant. | Dental implants are artificial tooth is placed into the patient's mouth through the surgery so that the denture is implanted into the jaw bone. One of Indonesia's natural wealth utilization potential to be developed as a dental implant material is zirconia. This study aimed to describe the characteristics of morphology, hardness and elastic modulus of silica- alumina zirconia metakaolin with chitosan as a coupling agent that is impregnated PMMA- apatite. This research is an experimental laboratories. The results showed the morphological characteristics of the samples are porous cavity that has not been properly distributed and varying pore size of the cavity. Hardness value is the sample owned 19.64 VHN, while the elastic modulus of the sample is 194,39 MPa. Conclusions This study is the morphological characteristics of the silica- alumina zirconia metakaolin with chitosan impregnated PMMA- apatite having varying pore cavity and not terdisitribusi well. Hardness values obtained are still not approaching the hardness of dentin, meaning that the results of the study can not be applied. Elastic modulus values obtained have not approached the elastic modulus of the bone, so it has not been qualified as a dental implant material. | |
| 8069 | 8743 | F1F008093 | AN ANALYSIS OF AN ASPERGER SYNDROME MAN 'DONALD MORTON' IN MOZART AND THE WHALE MOVIE | Penelitian ini bertujuan untuk mengidentifikasi tipe-tipe kalimat yang sulit dimengerti oleh Donald Morton (pria dengan sindrom asperger) di film Mozart and the Whale dan untuk mendeskripsikan jenis-jenis respon yang diujarkan Donald Morton (Pria dengan sindrom asperger) didalam film berjudul Mozart and the Whale. Penelitian ini memiliki dua rumusan masalah, (1) Tipe kalimat apa yang sulit dimengerti oleh Donald Morton (Pria dengan sindrom asperger) didalam film berjudul Mozart and the Whale? (2) Apa sajakah jenis-jenis respon yang diujarkan oleh Donald Morton (Pria dengan sindrom asperger) didalam film berjudul Mozart and the Whale? Penelitian ini dilakukan dengan metode deskriptif kualitatif. Data dalam penelitian ini adalah seluruh kalimat yang diujarkan oleh Donald Morton dan pemeran lain yang berkomunikasi dengannya yang dikategorikan menurut teori yang digunakan didalam penelitian ini, yaitu teori dari Happé dan Schank. Peneliti memiliki beberapa langkah dalam menganalisis data didalam penelitian ini. Yang pertama, peneliti menonton film Mozart and the Whale beberapa kali untuk memahami keseluruhan cerita. Yang kedua, peneliti mengamati kalimat yang diujarkan oleh pemeran utama dan pemeran lainnya melalui percakapan didalam film. Langkah selanjutnya adalah mengklasifikasi dan menganalisi data sesuai dengan teori yang telah dikemukakan dalam penelitian ini. Yang terakhir, menyampaikan kesimpulan dan saran. Setelah menganalisis data, penulis menemukan 14 data yang termasuk dalam tipe kalimat yang sulit dimengerti oleh Donald Morton (pria dengan sindrom asperger) dan tipe respon yang diujarkan Donald Morton. Ada 14 data dalam tipe kalimat yang sulit dimengerti oleh Donald Morton dibagi menjadi; joke 2 data, lie 1 data, irony 1 data, sarcasm 9 data dan pretence 1 data. Kemudian, ada 14 data untuk respon yang diujarkan Donald Morton diklsifikasikan menjadi absurd response (AR) 2 data, odd response (OR) 1 data, marginal relevant response (MR) 3 data, dan relevant but not too polite response (RnP) 8 data. Kata kunci: Sindrom Asperger, gangguan berbahasa, film Mozart and the Whale. | The research is aimed at identifying the types of the utterances that are difficult to understand by Donald Morton (an Asperger Syndrome man) in Mozart and the Whale movie and to describe the types of responses produced by Donald Morton (an Asperger Syndrome man) in Mozart and the Whale movie. This research has two question to be explored; those are: (1) What types of utterances are difficult to understand by Donald Morton (an Asperger Syndrome man) in Mozart and the Whale movie? (2)What kinds of responses produced by Donald Morton (an Asperger Syndrome man) in Mozart and the Whale movie? This study was conducted in descriptive qualitative method. The data of this study are all of the utterances produced by Donald Morton and the other character who has conversation with him which is categorized according to the theory used in this research, from Happé and Schank. The researcher has several steps in analyzing the data of the research. Firstly, the researcher watched the movie several times to understand the whole story. Secondly, the researcher collected the utterances which uttered by the main character and the other character who has conversation with him in the dialogue of the movie. The next step was categorized and analyzed the data based on the theory which is proposed in this research. Finally, the researcher presented the conclusion and suggestion. After analyzing the data, the researcher found 14 data which are included in the types of utterances that are difficult to understand by Donald Morton as an Asperger Syndrome man and the responses produced by Donald Morton. There were 14 data in the types of utterances that are difficult to understand by Donald Morton, which are classified into joke 2 data, lie 1 datum, irony 1 datum, sarcasm 9 data and pretence 1 datum. Then, there are 14 data in the types of responses produced by Donald Morton, which are classified into absurd response (AR) 2 data, odd response (OR) 1 datum, marginal relevant response (MR) 3 data and relevant but not too polite response (RnP) 8 data. Key words: Asperger Syndrome, language disorder, Mozart and the Whale movie. | |
| 8070 | 8741 | G1B010030 | FAKTOR- FAKTOR YANG MEMPENGARUHI KINERJA BIDAN DESA DALAM MELAKUKAN RUJUKAN IBU HAMIL RISIKO TINGGI DI KABUPATEN BANYUMAS | Kematian ibu di Kabupaten Banyumas dari tahun 2012 sampai dengan 2013 mengalami peningkatan dari 112/100.000 kelahiran hidup menjadi 126/100.000 kelahiran hidup. Jumlah ibu hamil berisiko tinggi di Kabupaten Banyumas pada tahun 2013 sebanyak 8.324 ibu hamil, tapi hanya 5.541 kasus yang dirujuk ke pelayanan kesehatan. Merujuk ibu hamil berisiko tinggi merupakan salah satu upaya untuk menurunkan AKI, yang merupakan tugas dari bidan desa. Tujuan penelitian ini adalah untuk menganalisis faktor- faktor yang mempengaruhi kinerja bidan desa dalam melakukan rujukan ibu hamil risiko tinggi di Kabupaten Banyumas. Penelitian ini menggunakan rancangan crossectional pendekatan kuantitatif. Pengumpulan data dilakukan dengan angket. Populasi penelitian adalah 399 bidan desa dengan jumlah sampel 106 bidan desa yang tersebar di 23 kecamatan di Kabupaten Banyumas dan dipilih secara cluster random sampling berdasarkan Kecamatan. Analisis data dilakukan dengan uji regresi logistik. Hasil penelitian menunjukkan bahwa ada hubungan yang signifikan antara pengetahuan dengan kinerja bidan desa dan keterampilan dengan kinerja bidan desa. Sedangkan yang tidak berhubungan dengan kinerja bidan desa adalah lama kerja, status kepegawaian, insentif/imbalan, sikap dan motivasi. Kesimpulan penelitian ini adalah faktor yang berhubungan dengan kinerja bidan desa adalah pengetahuan dan keterampilan, sedangkan faktor lainnya (lama kerja, status kepegawaian, insentif/imbalan, sikap, dan motivasi) tidak berhubungan dengan kinerja bidan desa. Pengetahuan dan keterampilan merupakan faktor yang paling berpengaruh terhadap kinerja bidan desa. Dengan demikian diharapkan peningkatan kemampuan bidan desa melalui pelatihan dan kursus. | Mortality in district banyumas of 2012 until 2013 has increased from 112 / 100.000 of live births be 126/100.000 of live births. The number of pregnant women at high risk in the Regency of Banyumas in 2013 as 8.324 pregnant women, but only 5,541 cases were referred to the health service. Refer pregnant women high-risk is aimed to lower mmr, that is the task of midwife village. The purpose of this research is to analyze the factors that affect the performance of the village midwife do references in pregnant women at high risk in the Regency of Banyumas. This research using design crossectional approach quantitative. Collecting data done with poll. The population of research is 399 a midwife village with the number of samples 106 a midwife village spread in 23 sub-district in the regency of banyumas and singled out based on cluster random sampling sub-districts. Analysis of data done by test regression logistics. The results showed that there was a significant relationship between knowledge with the performance of a midwife village and skill with the performance of a midwife village. While unrelated to performance midwife viilage is old workings, status of employment, incentives/reward, attitude and motivations. Conclusion of this research is the factor related to the performance of the village midwife is the knowledge and skills, while other factors (old workings, status of employment, incentives/rewards, attitudes, and motivations) not related to the performance of the village midwife. Knowledge and skills are the factors that most affect the performance of the village midwife. Thus can be advisable to Dept. of health and community health centers is optimize the role of cross program and cross sector and increase trainings. | |
| 8071 | 10467 | A1H010040 | SEBARAN ENERGI CAHAYA PADA MINIATUR PLANT FACTORY TERHADAP PERTUMBUHAN TANAMAN BAYAM MERAH (Amaranthus gangenticus) | Plant factory merupakan ruang tertutup yang dilengkapi rak-rak bertingkat untuk tempat penanaman dengan menggunakan sumber cahaya buatan. Tujuan dari penelitian ini adalah : 1) Mengetahui pengaruh sebaran energi cahaya pada miniatur plant factory terhadap pertumbuhan tanaman bayam merah (Amaranthus gangeticus), 2) Mengetahui keperluan pencahayaan serta kesesuaian suhu dan kelembapan dalam miniatur plant factory yang ada di laboratorium Teknik Pengembangan dan Pengendalian Bio-Lingkungan Universitas Jendral Soedirman dengan syarat tumbuh tanaman bayam merah (Amaranthus gangeticus). Penelitian dilaksanakan di laboratorium Teknik Pengembangan dan Pengendalian Bio-LingkunganUniversitas Jendral Soedirman, Purwokerto, Jawa Tengah. Penelitian berlangsung selama 2 bulan mulai dari bulan Agustus sampai dengan bulan Oktober 2014. Variabel-variabel yang diamati adalah tinggi tanaman, jumlah daun, luas daun, berat basah tanaman, berat kering tanaman, energi cahaya jatuh pada permukaan tanaman, suhu udara dan kelembaban udara. Untuk mengetahui pengaruh sebaran intensitas cahaya terhadap pertumbuhan tanaman, dilakukan uji korelasi antara data energi cahaya terserap tanaman terhadap data pertumbuhan bayam merah. Hasil yang diperoleh dari penelitian ini yaitu: 1) Sebaran energi cahaya dengan spektrum 300-600 nm pada miniatur plant factory berkorelasi positif terhadap pertambahan jumlah daun, luas daun dan tinggi tanaman tetapi tidak berpengaruh secara signifikan, 2) Pencahayaan miniatur plant factory masih perlu ditingkatkan sebanyak 5-6 kali untuk memenuhi kebutuhan intensitas cahaya yang dibutuhkan tanaman bayam merah (Amaranthus gangeticus) and 3) Suhu dan kelembaban dalam miniatur plant factory sudah sesuai dengan suhu dan kelembaban optimum yang dibutuhkan tanaman bayam merah (Amaranthus gangeticus). | Plant factory is a closed space in an airtight building or other structure where plants are grown on tiered shelves under artificial light. The purpose of this research was: 1) to know the effect of distribution of light energy at plant factory model on red spinach (Amaranthus gangeticus) growth rate, 2) to know the light intensity, temperature and air humidity conformity at plant factory model in Laboratory of Bio- Environment management and control enginering at Soedirman Univesity, Purwokerto with red spinach terms growing. The research was conducted in Laboratory of Bio- Environment management and control enginering at Soedirman Univesity, Purwokerto, Central java . This research was done in 2 months started from August to October 2014. The observing variables are crops height, leaves amount, leaves width, crop’s wet weight, crop’s dry weight, light energy absorbed by plants, air temperature and air humidity. To know the effect of distribution of light energy at plant factory miniature on red spinach growth, light energy absorbed by plants and red spinach data are analyzed using Correlation test. The results of this research are : 1) Red spinach growth rate increased with increasing light energi spectrum 300-600 nm, but distribution of light energi had no significant effect on the red spinach growth rate., 2) light intensity at plant factory miniature should be increased 5 times to meet the needs of light energy red spinach (Amaranthus gangeticus)., and 3)temperature and humidity at plant factory miniature are in accordance with the optimum temperatur and humidity required red spinach (Amaranthus gangeticus). | |
| 8072 | 10469 | A1H010082 | PENERAPAN EDIBLE COATING BERBAHAN DASAR LIDAH BUAYA DENGAN PENAMBAHAN CMC TERHADAP MUTU BUAH BELIMBING (Averhoa Carambola L. ) SELAMA PENYIMPANAN DINGIN | Gel lidah buaya berpotensi untuk diaplikasikan dalam teknologi edible coating, karena gel terdiri dari polisakarida yang mampu menghambat transfer gas CO2 dan O2, serta mengandung banyak komponen fungsional yang mampu menghambat kerusakan produk pascapanen yang berfungsi sebagai antimikroba. Tujuan dari penelitian ini untuk mengetahui pengaruh penambahan jumlah penambahan CMC, lama pencelupan dan kombinasi terbaik CMC dan lama pencelupan. Carboxymethylcellulose (CMC) merupakan turunan selulosa yang mudah larut dalam air. CMC mampu membentuk ikatan peptida dengan kasein dan mencegah terjadinya ikatan hidrogen antara kasein yang bermuatan negatif dan asam laktat yang bermuatan positif pada kondisi suasana asam, mengakibatkan protein terkoagulasi dan menurunkan daya ikat air serta memacu terjadinya sineresis. Belimbing diberikan perlakuan yaitu tanpa aloe vera coating (P0C0), lama pencelupan aloe vera 1 menit dengan konsentrasi CMC 0,5% (P1C1), lama pencelupan aloe vera 1 menit dengan konsentrasi CMC 1% (P1C2), lama pencelupan aloe vera 1 menit dengan konsentrasi CMC 1 (P1C3), lama pencelupan aloe vera 3 menit dengan konsentrasi CMC 0,5% (P2C1), lama pencelupan aloe vera 3 menit dengan konsentrasi CMC 1% (P2C2), lama pencelupan aloe vera 3 menit dengan konsentrasi CMC 1,5% (P2C3), dan lama pencelupan aloe vera 5 menit dengan konsentrasi CMC 0,5% (P3C1), lama pencelupan aloe vera 5 menit dengan konsentrasi CMC 1% (P3C2), lama pencelupan aloe vera 5 menit dengan konsentrasi CMC 1,5% (P3C3). Variabel mutu yang diamati yaitu susut bobot, kekerasan, total padatan terlarut, warna (Lab), dan uji organoleptik meliputi (warna, tekstur, rasa, dan aroma) yang diamati 3 hari sekali selama15 hari. Hasil penelitian menunjukkan penggunaan aloe vera coating berpengaruh nyata terhadap susut bobot, kekerasan, total padatan terlarut, warna (L, a-, b+). Perlakuan terbaik didapat pada nilai susut bobot (P3C3); kekerasan (P3C3); total padatan terlarut (P3C3); L pada (P3C3); nilai a(-) pada (P3C3); b(+) pada (P1C2); skala warna (P3C3).; skala tekstur(P2C3).; skala rasa (P3C3).; skala aroma (P3C3). | Aloe vera gel tongue has the potential to applied in technology edible coatings; because gel consisting of polysaccharides capable of inhibiting transfer gas co2 and o2, as well as containing many functional components capable of inhibiting the product pascapanen damage that serves as antimikroba.The purpose of research is to know the influence of the addition of the number of additional cmc, long immersion and the combination of best cmc and long immersion.Carboxymethylcellulose ( cmc ) is a derivative of cellulose which dissolves easily in waterCmc capable of forming peptide bonds with casein and prevent the occurrence of hydrogen ties between casein who negatively charged and lactic acid that positively charged atmosphere in acid conditions, terkoagulasi result in protein and connective lowering water resources and the occurrence of sineresis spur.Leatherback given namely without treatment of aloe vera coatings (P0C0) long immersion of aloe vera 1 minute with concentration cmc 0.5 % (P1C1)long immersion of aloe vera 1 minute with concentration of the cmc 1 (P1C2), long immersion of aloe vera three minutes by concentration of the cmc 1.5 % (P1C3), long immersion of aloe vera three minutes by concentration of the cmc 0,5 % (P2C1 ) , long immersion of aloe vera three minutes by concentration of the cmc 1 % (P2C2) , long immersion of aloe vera three minutes by concentration of the cmc 1,5 % (P2C3) and long immersion of aloe vera 5 minutes by concentration of the cmc 0.5 % (P3C1), long immersion of aloe vera 5 minutes by concentration of the cmc 1 % (P3C2), long immersion of aloe vera 5 minutes by concentration of the cmc 1.5 % (P3C3).The safety variables observed that is either a keel weights , violence , total dissolved solids , colors ( the lab ) , and the organoleptik covering ( color , texture , a sense of , and the scent ) observed 3 day once upon selama15 day .The research results show the use of of aloe vera coatings influential real weight against either a keel , violence , total dissolved solids , colors ( l , a-horizon , b + ) .Best treatment acquired at the value of either a keel (P3C3) weight ; violence (P3C3); total dissolved solids (P3C3); l on (P3C3); a value of a ( - ) on (P3C3); b ( + ) on (P1C2); scale colors (P3C3). ; Scale texture (P2C3). ; scale taste (P3C3). ; scale scent (P3C3). | |
| 8073 | 8744 | A1L009003 | HASIL DAN KOMPONEN HASIL GALUR PADI SAWAH (Oryza sativa L) KETURUNAN PERSILANGAN G39×CIHERANG | Penelitian tentang hasil dan komponen hasil galur padi sawah (Oryza sativa L.) keturunan persilangan G39×Ciherang telah dilaksanakan pada bulan April sampai dengan Agustus 2013 di lahan sawah Desa Pasir Kulon, Kecamatan Karanglewas, Kabupaten Banyumas. Tujuan dari penelitian ini adalah untuk; 1) mengkaji daya hasil dan komponen hasil galur padi sawah keturunan persilangan G39×Ciherang. 2) mendapatkan galur-galur padi sawah berdaya hasil tinggi dan umur genjah keturunan persilangan G39×Ciherang. Penelitian menggunakan rancangan acak kelompok lengkap (RAKL). Variabel yang diamati yaitu tinggi tanaman, panjang malai, jumlah anakan produktif, jumlah anakan total per rumpun, umur berbunga, umur panen, jumlah gabah total per malai, presentase gabah isi per malai, bobot gabah per rumpun, bobot 1000 biji, dan hasil (kg/m2). Hasil penelitian menyimpulkan 1) Daya hasil dan komponen hasil galur padi sawah (Oryza sativa L) keturunan G39×Ciherang beragam. Terdapat 4 genotip dengan daya hasil tinggi dan komponen hasil yang baik (P-39//CH-PK29, P-39//CH-PK31, P-39//CH-PK34, dan P-39//CH-PK38). Terdapat 5 genotip dengan daya hasil tinggi dan komponen hasil yang kurang baik (P-39//CH-PK32, P-39//CH-PK37, P-39//CH-PK42, P-39//CH-PK43, dan P-39//CH-PK45). 2) Galur-galur padi sawah keturunan G39×Ciherang dengan daya hasil yang tinggi dan umur genjah adalah P-39//CH-PK43 (4,2 t/ha/113 hari), P-39//CH-PK45 (4,2 t/ha/115 hari), P-39//CH-PK37 (4,0 t/ha/107 hari), P-39//CH-PK42 (3,8 t/ha/109 hari), P-39//CH-PK29 (3,7 t/ha/111 hari), P-39//CH-PK31 (3,7 t/ha/109 hari). | The research on yield and yield components of rice lines (Oryza sativa L.) progeny of crossing G39×Ciherang. This study was conducted on April to August 2013 in the paddy fields of Pasir Kulon village, Karanglewas District, Banyumas. The purpose of this study was to: 1) assess the yield and yield components of paddy rice lines progeny of crossing G39×Ciherang. 2) obtain lines of high yielding and early naturing from paddy rice progeny of crossing G39×Ciherang. The research using a randomized complete block design (RCBD). Variables observed were plant height, panicle length, number of productive tillers, total number of tillers per hill, days to flowering, maturity, the total number of grains per panicle, percentage of filled grains per panicle, grain weight per hill, weight of 1000 seeds, and grain yield ( kg/m2). The results showed 1) The high yielding and the yield components of rice lines (Oryza sativa L) progeny of crossing G39 ×Ciherang were varied. There we 4 genotypes with high grain yield and yield components (P-39 // CH-PK29, P-39 // CH-PK31, P-39 // CH-PK34, and P-39 // CH-PK38). There we 5 genotypes with high grain yield but they performe less yield components (P-39 // CH-PK32, P-39 // CH-PK37, P-39 // CH-PK42, P-39 // CH-PK43, and P-39 // CH-PK45). 2) paddy rice lines with high yield and early naturing were asgenotypic P-39//CH-PK43 (4,2 t/ha/ 113 day), P-39//CH-PK45 (4,2 t/ha/ 115 day), P-39//CH-PK37 (4,0 t/ha/ 107 day), P-39//CH-PK42 (3,8 t/ha/ 109 day), P-39//CH-PK29 (3,7 t/ha/ 111 day), and P-39//CH-PK31 (3,7 t/ha/ 109 day). | |
| 8074 | 10468 | A1H010065 | UJI PERFORMANSI MESIN PENGAMPLAS TEMPURUNG KELAPA MODEL AMPLAS CIRCLE DI UKM SOMACOCO DESA SOKAWERA KABUPATEN BANYUMAS | Dalam proses produksi, penggunaan mesin berfungsi untuk mempercepat proses produksi. Penelitian ini bertujuan 1) mengetahui kinerja dari mesin pengamplas model amplas circle, 2) mengetahui kualitas hasil pengamplasan, 3) mengetahui sebaran debu yang dihasilkan pada proses pengamplasan, 4) mengetahui analisis ekonomi dari mesin pengamplas model amplas circle. Penelitian dilaksanakan di UKM Somacoco Desa Sokawera Kabupaten Bayumas dilaksanakan dari Bulan September sampai Desember 2014. Alat dan bahan yang digunakan pada penelitian ini antara lain mesin pengamplas dengan model amplas circle, timbangan digital, stopwatch, masker, kacamata, sarung tangan, tempurung kelapa dan amplas kayu dengan grit kekasaran 40 dan 80. Variabel yang diamati pada penelitian ini adalah kapasitas pengamplasan, energi listrik, kebutuhan energi manusia, kebutuhan daya spesifik, efisiensi penggunaan energi, dan kualitas hasil pengamplasan. Hasil penelitian bahwa kapasitas pengamplasan yang paling banyak adalah 21 batok/jam, kebutuhan daya spesifik pada kapasitas pengamplasan yang paling banyak adalah 5,87 x10-3 kWh/batok, kebutuhan energy listrik pada kapasitas pengamplasan terbanyak adalah 0,65 MJ, kebutuhan energy manusia pada kapasitas pengamplasan yang paling banyak adalah 0,1005 MJ, efisiensi penggunaan energy listrik adalah 94.86%, efisiensi penggunaan energy manusia adalah 94.88%, dan break event point (BEP) dicapai bila kapasitas proses pengamplasan mencapai 1386 batok/tahun | In the production process, the use of machines the use of the machine serves to speed up the production process. This study aims to 1) determine the performance of the machine sanding sandpaper models circle, 2) determine the quality of sanding, 3) determine the distribution of the dust produced in the process of sanding, 4) determine the economic analysis of machine sanding sandpaper models circle. The experiment was conducted in UKM Somacoco at Sokawera Village, Banyumas regency, conducted from September to December 2014. Tools and materials used in this study include sanding machine sanding with sandpaper circle models, digital scales, stopwacth, masks, goggles, gloves, with materials research coconut shell and wood with sandpaper roughness of 40 and 80. The variables were observed in this study are sanding capacity, electrical energy, human energy requirements, the specific power requirements, energy efficiency, and quality of sanding. Result of the experiments showed that highest sanding capacity was 21 coconut shell/hour, specific electrical power requirement at the highest capacity was 5.87x10-3 KWh/coconut shell, electrical energy needs at the highest capacity was 0.65 MJ, human energy needs at the highest capacity was 0.1005 MJ, efficiency of electrical energy was 94.86%, efficiency of human energy was 94.88%, and (6) break even point was achieved when the capacity of sanding process was 1386 cocunut shells/year. | |
| 8075 | 11017 | B1J010173 | KELIMPAHAN MIKROALGA BENTIK YANG BERPOTENSI SEBAGAI BAHAN BAKAR NABATI (BIOFUEL) DI PERAIRAN SUNGAI PEKACANGAN YANG TERKENA LIMBAH CAIR TAPIOKA DI KABUPATEN PURBALINGGA | Mikroalga selain berperan sebagai produsen primer juga memiliki potensi untuk menghasilkan biofuel. Pertumbuhannya yang cepat, kemampuan untuk menghasilkan minyak alami (lipid) yang besar dengan sedikit polusi dibandingkan bahan bakar petroleum menjadikan salah satu alternatif bahan bakar nabati yang dapat diperbaharui (renewable resources). Mikroalga banyak dijumpai di perairan sungai, Sungai Pekacangan Purbalingga merupakan badan air yang digunakan untuk aktivitas mandi, cuci, perikanan, tambang pasir dan juga dimanfaatkan sebagai tempat pembuangan limbah cair dari industri tapioka. Limbah cair tapioka merupakan jenis limbah organik yang telah mengalami proses penguraian oleh bakteri dan merupakan nutrien yang diperlukan untuk pertumbuhan mikroalga. Tujuan penelitian ini adalah untuk mengetahui kelimpahan mikroalga di Sungai Pekacangan yang terkena limbah cair industri tapioka dan menentukan jenis mikroalga yang berpotensi sebagai bahan bakar nabati (biofuel). Penelitian ini menggunakanmetode survai dengan teknik pengambilan sampel secara purposive samplingberdasarkanrona lingkungan yang ada, yaitu stasiun I lingkungan sebelum pembuangan limbah cair tapioka, stasiun II tepat pembungan limbah cair tapioka, stasiun III 1 km setelah pembuangan limbah cair tapioka dan stasiun IV 2 km setelah pembuangan limbah cair tapioka. Sebagai parameter utama adalah jumlah jenis dan jumlah individu mikroalga, sedangkan parameter pendukung penelitian adalah suhu, penetrasi cahaya, pH, O2 terlarut, BOD5, kecepatan arus, TSS, TDS, nitrat, ortofosfat dan silika. Kelimpahan mikroalga bentik yang diamati dianalisis secara deskriptif dan mikroalga yang diperoleh pada stasiun yang tepat terkena limbah dianalisis dengan melakukan skrining untuk mengetahui kandungan minyak. Jumlah kelimpahan mikroalga bentik pada stasiun sebelum, tepat dan setelah pembuangan limbah sebesar 404.954 ind.mm-2. Kelimpahan tertinggi pada stasiun sebelum terkena limbah sebesar 442.257 ind.mm-2 dengan prosentase kelimpahan relatif 0,07 %; diikuti stasiun III 1 km setelah pembuangan limbah sebesar 425.772 ind.mm-2 dengan prosentase kelimpahan relatif 0,01 %; selanjutnya stasiun IV 2 km setelah pembuangan limbah sebesar 382.275 dengan prosentase kelimpahan relatif 0,09% dan jenis mikroalga bentik yang berpotensi sebagai biofuel yang hanya dijumpai pada stasiun II tepat pembuangan limbah yaitu Clylomonas sp. dengan kelimpahan sebesar 45.519 ind.mm-2, Ulothrix sp. dengan kelimpahan sebesar 2.678 ind.mm-2, Anabaena sp. dengan kelimpahan sebesar 6.694 ind.mm-2, Synechococcuss sp. dengan kelimpahan sebesar 4.016 ind.mm-2, Craticula sp. dengan kelimpahan sebesar 1.339 ind.mm-2 dan Euglena tripteris dengan kelimpahan sebesar 1.339 ind.mm-2. | Beside having a function as primary producers, microalgae also has potential ability to produce biofuel. With rapid growth, its ability to produce natural oils (lipids) with less pollution than of petroleum fuels make it one of alternative renewable biofuel (renewable resources). Microalgae is often found in the river, Pekacangan River in Purbalingga is one of water resources that in addition to bathing, washing, fishing, sand mining by local villagers is also used as a liquid waste disposal area of starch. Industry tapioca liquid waste is a type of organic waste which has undergone a process of decomposition by bacteria and that is necessary as nutrient for the growth of microalgae. The purpose of this study was to determine the abundance of microalgae in Pekacangan River which is contaminated by tapioca’s industrial liquid waste and determine the type of microalgae which is potential as biofuels. This study used a survey method with purposive sampling technique based on the environmental setting, i.e. I station before contamination by tapioca liquid waste, II station contaminated by tapioca liquid waste, III station 1 km after contamination by tapioca liquid waste and IV station 2 km after contamination by tapioca liquid waste. As the main parameter were total number of species and total number of individuals microalgae, while research parameters were temperature, light penetration, pH, dissolved O2, BOD5, flow velocity, TSS, TDS, nitrate, orthophosphate and silica. Abundance of benthic microalgae which observed was analyzed descriptively and microalgae that obtained at the appropriate stations affected by the waste was analyzed by screening to determine the oil content. The total abundance of benthic microalgae at the previous satation, right and after disposal of 404 954 ind.mm-2. The highest abundance at station before exposure to the waste is 442 257 ind.mm-2 with a percentage of 0.07% relative abundance; followed by the III station 1 km after the disposal is 425.772 ind.mm-2 with a percentage of 0.01% relative abundance; the next IV station 2 km after the disposal is 382.275 with a percentage of 0.09% relative abundance and types of benthic microalgae potential as a biofuel that is only found in the proper waste disposal station II is Clylomonas sp. with an abundance of 45 519 ind.mm-2, Ulothrix sp. with an abundance of 2.678 ind.mm-2, Anabaena sp. with an abundance of 6694 ind.mm-2, Synechococcuss sp. with an abundance of 4,016 ind.mm-2, Craticula sp. with an abundance of 1,339 ind.mm-2 and Euglena tripteris with an abundance of 1,339 ind.mm-2. | |
| 8076 | 10472 | A1C010090 | PENGUKURAN TINGKAT KINERJA KOPERASI MELALUI METODE PTP (PENGUKURAN TANGGA PERKEMBANGAN) STUDI KASUS DI KOPERASI PESAT KABUPATEN BANYUMAS | ABSTRAK Kinerja adalah suatu tampilan keadaan secara utuh atas perusahaan selama periode waktu tertentu, merupakan hasil atau prestasi yang dipengaruhi oleh kegiatan operasional perusahaan dalam memanfaatkan sumber-sumber daya yang dimiliki (Helfert, 2006). Pengukuran kinerja pada suatu organisasi/perusahaan sangatlah diperlukan karena dapat memotivasi personal dalam mencapai sasaran organisasi dan dalam memenuhi standar perilaku yang telah ditetapkan sebelumnya, sehingga membuahkan tindakan dan hasil yang diinginkan oleh organisasi (Mulyadi dan Setyawan, 2010). Tujuan dari penelitian ini adalah : 1) mengetahui keadaan/profil koperasi PESAT, 2) mengetahui tingkat kinerja koperasi PESAT, dan 3) mengetahui variabel dominan penentu kinerja koperasi PESAT. Sasaran penelitian ini adalah Pengurus, karyawan dan anggota koperasi PESAT Banyumas dengan jumlah total responden sebanyak 31 orang. Penelitian ini dilakukan dari bulan April – September 2014. Metode yang digunakan dalam penilaian kinerja koperasi adalah metode (PTP) Pengukuran Tangga Perkembangan. Variabel yang digunakan untuk menilai kinerja suatu koperasi adalah visi, kapasitas organisasi, sumber daya, dan jaringan kerja. Hasilpenelitianmenunjukkanbahwakoperasi PESAT merupakan koperasi yang maju terlihat dari neraca koperasi tahun 2011-2013 mengalami kenaikan serta hasil usahanya pun mengalami kenaikan. Untuk tingkat kinerja, koperasi PESAT mendapatkan skor 129,4 yaitu masuk dalam katagori baik atau predikat hijau dengan rentang skor 108-155. Sedangkan untuk variable dominan penentu kinerja koperasi PESAT diketahui adalah variable sumberdaya. Kata kunci :Kinerja, koperasi, Pengukuran Tangga Perkembangan (PTP) | ABSTRACT Performance is a description of the company state over a period of time, the result or achievement is affected by the operations of the company in utilizing resources owned (Helfert, 2006). Performance measurement in an organization / company is required because it can motivate personnel in achieving the organization's objectives and the standards of behavior that has been previously set, so that led to action and results desired by the organization (Mulyadi and Setiawan, 2010). The aim of this study were: 1) know the state / PESAT cooperative profile, 2) determine the level of PESAT cooperative performance, and 3) determine the dominant variablethat determinant PESAT cooperative performance. The target of this research is the Board, employees and members of PESAT cooperative in Banyumas, the total number of respondents are 31 people. This study was carried out from April - September 2014.The method used in the assessment of the performance of the PESAT cooperative is a (DLA) Development Ladder Assessment Method. Variables used to assess the performance of a cooperative is a vision, organizational capacity, resources, and networking. The results showed that the PESAT cooperative is a cooperative advanced visible from the cooperative balance in 2011-2013 has increased as well as the crops also increased. To the level of performance, PESAT cooperative scored 129.4 is included in the category of good or green predicate with a score range 108-155. As for the dominant determinant variable PESAT cooperative performance is variable resource known. Keyword :performance, cooperative development, Development Ladder Assessment (DLA) Method | |
| 8077 | 8745 | A1M010012 | PENGARUH PROPORSI TEPUNG KORO PRA-GERMINASI DAN PATI SERTA PENGGUNAAN JENIS PATI BERBEDA TERHADAP KARAKTERISTIK FISIK, KIMIA DAN SENSORI COOKIES KORO PEDANG (Canavalia ensiformis) | Permasalahan yang dihadapi dalam pemanfaatan koro pedang adalah adanya zat antigizi asam sianida. Oleh sebab itu, diperlukan adanya sebuah proses pengolahan yang dapat mengurangi komponen antigizi tersebut yaitu pra-germinasi. Salah satu cara pemanfaatan tepung koro pedang dalam bidang pengolahan pangan adalah melalui pembuatan cookies. Pada penelitian ini dibuat cookies tepung koro pedang dengan penambahan jenis pati berbeda yaitu tapioka dan pati irut. Penelitian ini bertujuan untuk: 1. menentukan jenis pati yang paling tepat yaitu antara tapioka dan pati irut; 2. menentukan proporsi yang tepat antara tepung kacang koro pedang pra-germinasi dan pati agar dihasilkan cookies dengan sifat fisik, kimia maupun sensori yang baik; 3. menentukan kombinasi yang paling tepat antara proporsi tepung koro pra-germinasi dan pati serta penambahan jenis pati. Hasil penentuan perlakuan terbaik yang dilakukan dengan metode indeks efektifitas diketahui bahwa cookies dengan proporsi tepung koro pra-germinasi dan tapioka = 80:20 (P2K2) adalah cookies dengan sifat fisik, kimia dan sensori terbaik. Hasil analisis kimia dan sensori menunjukkan cookies perlakuan terbaik memiliki kadar air sebesar 1,70% bb, protein total 11,84% bk, protein terlarut 2,06% bk, karbohidrat by difference 90,26% bk, kadar lemak 6,27% bk, kadar abu 0,78% bk dan kadar HCN 0,0014% bk dengan tekstur renyah (2,93), aroma khas koro “agak khas” (3,02), rasa khas koro “agak khas” (3), dan tingkat kesukaan “disukai” (2,78). | Sword jack bean’s problem to be utilized is cyanide content as anti-nutritional substance. Therefore, to utilize sword jack bean is required a process that called pre-germination to decrease cyanide content. One of sword jack bean flour’s utilization in food processing was through making cookies. This research made cookies with sword jack bean flour and added different starch, tapioca and arrowroot starch. This research are aimed 1. to determine kind of proper starch between tapioca and arrowroot starch; 2. to determine proper proportion between pre-germinated sword jack bean flour and starch so produced cookies with good physical, chemical, and sensory properties; 3. to determine the most appropriate combination between pre-germinated sword jack bean flour and starch as well as the addition of starch. The best treatment determined by effectiveness index method showed that cookies made from proportion of pre-germinated sword jack bean’s flour and tapioca 80 : 20 (P2K2). The cookies had best physical, chemical, and sensory properties. This product had water content of 1.70 % wb, total protein of 11.84 % db, dissolved protein of 2.06 % db, carbohydrate by difference of 90.26 % db, fat content of 6.27 % db, ash content of 0.78 % db, and HCN content of 0.0014 % db, and had crunchy texture (score 2.93), jack bean typical aroma “rather typical” (score 3.02), jack bean typical flavor “rather typical” (score 3), and hedonic level was “preferred” (score 2.78). | |
| 8078 | 11018 | G1G008057 | PERBANDINGAN SUDUT SNA, SNB, DAN ANB PADA PENDERITA THALASEMIA BETA MAYOR DAN INDIVIDU NORMAL | PERBANDINGAN SUDUT SNA, SNB DAN ANB PADA PENDERITA THALASEMIA BETA MAYOR DAN INDIVIDU NORMAL Thalasemia merupakan salah satu jenis anemia hemolitik dimana proses kerusakan sel darah merah lebih cepat daripada normal. Thalasemia beta merupakan jenis thalasemia dimana jumlah rantai hemoglobin beta kurang dari normal atau tidak ada. Thalasemia mayor merupakan jenis thalasemia dimana penderita menunjukkan gejala klinis. Penderita thalasemia beta mayor mengalami pembesaran tulang pipih, salah satunya adalah pada maksila dan mandibula. Penelitian ini bertujuan untuk membandingkan sudut SNA, SNB dan ANB pada penderita thalasemia beta mayor dan individu normal. Jenis penelitian ini adalah penelitian kuantitatif dengan metode survei analitik dan pendekatan cross sectional. Sampel penelitian ini dibagi menjadi dua kelompok yaitu, kelompok pertama 10 penderita thalasemia beta mayor yang berusia 12-18 tahun dan kelompok kedua 10 individu normal dengan usia yang sama. Pengambilan sampel menggunakan total sampling dengan sampel yang memenuhi kriteria inklusi dan eksklusi terbatas. Penelitian ini dilakukan di RS PMI Bogor Jawa Barat. Dilakukan pengukuran sudut SNA, SNB dan ANB dengan menggunakan foto sefalometri pada kedua kelompok tersebut. Metode analisis yang digunakan adalah deskriptif. Hasil penelitian ini menunjukkan sudut SNA pada individu normal memiliki nilai rata-rata 81,35o, SNB memiliki rata-rata 78,3o, dan ANB memiliki rata-rata 2,6o. Pada penderita thalasemia beta mayor sudut SNA memiliki rata-rata 83,1o, SNB memiliki rata-rata 75,4o, dan ANB memiliki rata-rata 8,5o. Berdasarkan hasil tersebut sudut SNA dan ANB penderita thalasemia beta mayor lebih besar daripada individu normal, namun pada nilai sudut SNB penderita thalasemia beta mayor lebih kecil daripada individu normal. | THE COMPARISON OF SNA, SNB AND ANB ANGELS IN BETA THALASSEMIA MAJOR PATIENTS AND NORMAL INDIVIDUALS Thalassemia is a type of hemolytic anemia which the red blood cell damage more quickly than normal. Beta thalassemia is a type of thalassemia which the number of beta chain of hemoglobin less than normal or does not exist. Thalassemia major is a type of thalassemia which the patients show clinical symptoms. Patients with beta thalassemia major have enlarged flat bone including the maxilla and mandible. The aim of this study is to compare the angles of SNA, SNB and ANB in patients with beta thalassemia major and normal individuals. The type of this study is a quantitative research method with analytical survey and cross sectional approach. The sample of this study was divided into two groups, the first group consist of 10 patients with beta thalassemia major aged 12-18 years old and the second group consist of 10 normal individuals with the same age. This study used total sampling with the sample that has criteria for inclusion and exclusion. This study was conducted at Hospital PMI Bogor, West Java. SNA, SNB and ANB angle measured by using cephalometric photos in both groups. The analytical method of this study is descriptive. The results of this study shows the average of SNA angle is 81,35o, the SNB is 78,4o, and ANB is 2,6o for normal individuals, while In patients with beta thalassemia major the average of SNA angle is 83,1o, the SNB is 75,4o, and ANB is 8,6o. Based on these results, it can be concluded that the SNA and ANB angles in patients with beta thalassemia major is greater than normal individuals, but the SNB angle of beta thalassemia major patients is lesser than normal individuals. | |
| 8079 | 11584 | E1A010159 | TINDAK PIDANA PEMBUNUHAN BERENCANA (STUDI TENTANG PUTUSAN PENGADILAN NOMOR 1036 / Pid / B / 2008 / PN. DPK) | Penelitian ini bertujuan untuk mengetahui bagaimana kekuatan pembuktian alat bukti keterangan saksi dalam Putusan Pengadilan Negeri Depok No. 1036 / Pid / B / 2008 / PN. DPK, dan untuk mengetahui dasar pertimbangan hukum hakim dalam menjatuhkan pidana terhadap pelaku tindak pidana pada Putusan Pengadilan Negeri Depok No. 1036 / Pid / B / 2008 / PN. DPK. Jenis penelitian dalam skripsi ini menggunakan metode pendekatan yuridis normatif dengan spesifikasi penelitian in concreto. Sumber data yang digunakan adalah data sekunder. Teknik pengumpulan data yang digunakan adalah studi kepustakaan. Data-data yang diperoleh disajikan dalam bentuk teks naratif. Analisis data menggunakan analisis kualitatif. Hasil penelitian ini adalah 1) Saksi yang dihadirkan dalam persidangan telah memenuhi syarat formil dan materiil sesuai dengan Pasal 185 KUHAP. Saksi telah memenuhi syarat formil karena dalam memberikan kesaksiannya saksi menghadap ke persidangan secara lisan dipanggil satu demi satu dengan terlebih dahulu mengangkat sumpah atau janji menurut agamanya. Saksi juga memenuhi syarat materiil karena saksi melihat, mendengar, dan/atau mengalami sendiri peristiwa pembunuhan, keterangan saksi saling bersesuaian satu sama lain yang menimbulkan keyakinan hakim bahwa terdakwa telah melakukan pembunuhan berencana. 2) Pertimbangan hakim dalam menjatuhkan pidana sudah sesuai Pasal 183 KUHAP, karena hakim menjatuhkan pidana berdasarkan sekurang-kurangnya dua alat bukti yang sah yaitu keterangan saksi, keterangan ahli, keterangan terdakwa dan alat bukti surat berupa visum et repertum, hakim memperoleh keyakinan bahwa tindak pidana pembunuhan berencana telah terjadi dan terdakwa yang melakukan pembunuhan. | This studi aims to determine how the evidentiary strength of evidence statements of witnesses in state court decision Depok No. 1036 / Pid / B / 2008 / PN. DPK and to know the basic consideration of judges in imposing criminal law against perpetrators of criminal acts in the state court decision Depok No. 1036 / Pid / B / 2008 / PN. DPK. Types of research in this thesis using normative juridical approach to the specification of the research in concreto. Source data used is secondary data. Data collection techniques used is literature study. The data obtained is presented in the form of a narrative text. Data analysis using qualitative analysis. The result of this study are : 1) witnesses presented in court have met the formal requirements and material in accordance with article 185 Criminal Procedure Code. Witnesses have fulfilled the formal requirements for the witness to testify orally facing trial are called one by one by first taking an oath or affirmation according to religion. The witness also eligible material because the witness saw, heard, and/or experience assassination murder, witness testimony fit together with each other which lead to the belief the judge that the defendant has committed murder. 2) consideration of judges in imposing criminal is in conformity with article 183 Criminal Procedure Code, because the judge convict based on at least two legal evidence is witness testimony, expert testimony, testimony from the accused and documentary evidence in the form of a post mortem judges gain confidence that the crime of murder has occured and the defendant who commited murder. | |
| 8080 | 8746 | A1H010041 | PREDIKSI UMUR SIMPAN DAN KUALITAS KERUPUK BAWANG GORENG MINYAK DAN PASIR DALAM KEMASAN PLASTIK HDPE (High Density Polyethylene) DAN TOPLES PLASTIK PP (Polyprophylene) | Pengolahan kerupuk bawang pada umumnya digoreng dengan minyak. Namun penggunaan minyak goreng akhir-akhir ini menimbulkan permasalahan terkait dengan harga yang melambung cukup tinggi, inovasi yang dapat digunakan sebagai pengganti minyak yaitu dengan pasir. Kerupuk bawang yang gurih dan renyah akan lebih diinginkan oleh konsumen. Oleh karena itu pengemasan menjadi faktor penting dalam mempertahankan umur simpan dan kualitas kerupuk bawang. Pada penelitian ini kerupuk bawang goreng minyak dan pasir disimpan pada plastik HDPE ketebalan 0,02 mm dan toples plastik PP ketebalan 2,75 mm. Tujuan dari penelitian ini adalah mengetahui umur simpan dan kualitas kerupuk bawang goreng minyak dan pasir jika dikemas menggunakan plastik HDPE ketebalan 0,02 mm dan toples plastik PP ketebalan 2,75 mm selama penyimpanan. Hasil penelitian menunjukkan bahwa umur simpan kerupuk bawang goreng minyak dalam kemasan plastik HDPE dan toples plastik PP yaitu selama 6 hari dan 17 hari, sedangkan kerupuk bawang goreng pasir dengan kemasan yang sama yaitu selama 14 hari dan 34 hari. Nilai rata-rata kadar air, tegangan dan uji organoleptik kerupuk bawang goreng minyak dalam kemasan plastik HDPE dan toples plastik PP di akhir penyimpanan yaitu 8,18%bk, 4,53%bk; 0,50 N/mm2, 0,12 N/mm2; (1) sangat tidak renyah dan (5) sangat renyah. Nilai rata-rata kadar air, tegangan dan uji organoleptik kerupuk bawang goreng pasir dalam kemasan plastik HDPE dan toples plastik PP di akhir penyimpanan yaitu 12,33%bk, 7,47%bk; 0,37 N/mm2, 0,18 N/mm2; (2,2) tidak renyah dan (4) renyah. | Onion crackers are generally fried in oil. Lately, using cooking oil make a problem because the price is high, innovation can be used as a substitute for oil with sand. Onion crackers are tasty and crispy would be more desirable by consumers. Therefore, packaging is an important factor in maintaining the shelf life and quality of onion crackers. In this research, onion crackers fried in oil and fried in sands saved in a 0,02 mm HDPE and 2,75 mm PP jar. The purposes of this research was to determine the shelf life and quality of onion crackers fried in oil and sands if packaged using 0,02 mm HDPE and 2,75 mm PP jar during storage. The results of this research is showed that the shelf life of the onion crackers fried in oil packaged in HDPE and PP jar that is for 6 days and 17 days, while the onion crackers fried in sand with the same package is for 14 days and 34 days. The average of water content value, stress and organoleptic for onion crackers fried in oil packaged in HDPE and PP jar at the end of bk storage is 8,18%, 4,53% db; 0,50 N/mm2, 0,12 N/mm2; (1) is not crisp and (5) very crisp. The average of water content value, stress and organoleptic for onion crackers fried in sand packaged in HDPE and PP jar at the end of bk storage is 12,33%, 7,47% db; 0,37 N/mm2, 0,18 N/mm2; (2,2) is not crisp and (4) crunchy. |