Home
Login.
Artikelilmiahs
9077
Update
MUTIA IRNAWATI
NIM
Judul Artikel
PENGARUH KOMPOSISI SERAT TEBU DAN E-GLASS TERHADAP SIFAT MEKANIK PADA PROTOTYPE GENTENG FIBERGLASS ORGANIK
Abstrak (Bhs. Indonesia)
Genteng alternatif yang berasal dari polimer dinamakan genteng komposit polimer atau genteng fiberglass. Bahan komposit yang digunakan dalam pembuatan genteng fiberglass adalah serat E-Glass dan serat tebu. Penelitian ini menggunakan metode hand-lay-up dimana serat tebu sebagai filler yang disusun dengan arah serat 0 atau 90, sedangkan Polyester Resin dan Methyl Ethyl Keton Peroxide (MEKPO) sebagai matriks dengan perhitungan fraksi volume 0%, 5%, 10%, dan 15%. Kode sampel untuk fraksi volume 0%, 5%, 10%, dan 15% yaitu GF-1, GF-2, GF-3, dan GF-4. Kekuatan sifat mekanik seiring dengan penambahan jumlah serat tebu. Karakteristik sifat mekanik dari sampel GF-4 menghasilkan kuat tekan sebesar 380,93 MPa, kuat impact sebesar 0,139 J/mm2, dan kekerasan bahan sebesar 277,82 N/mm2. Besarnya kekuatan mekanik yang diperoleh membuktikan bahwa serat E-Glass dan serat tebu dapat digunakan sebagai filler yang ramah lingkungan dan ekonomis telah memenuhi beberapa karakteristik genteng komposit.
Abtrak (Bhs. Inggris)
Alternative tile originating from a polymer called polymer composite tile or fiberglass tile. Composite materials used in the manufacture of fiberglass tile is E-Glass fibers and sugarcane fiber. Sugarcane fiber is used because it is cheap, good for light construction, and environmentally friendly. This study using hand-lay-up method in which fibers are arranged as a filler with unidirectional fiber direction angle of 0, while Polyester Resin and Methyl Ethyl Ketone Peroxide (MEKPO) as a matrix with the calculation of the volume fraction of 0%, 5%, 10%, and 15%. Code samples for the volume fraction of 0%, 5%, 10%, and 15% that GF-1, GF-2, GF-3 and GF-4. The strength of the mechanical properties due to the addition of sugar cane fibers. The characteristics of the mechanical properties of the sample GF-4 produces the bending strength of 380,93 MPa, the strong impact of 0,139 J/mm2, the material hardness of 277,82 N/mm2. The amount of mechanical strength obtained prove that the E-Glass fibers and fiber cane can be used as filler environmentally friendly and economically has met some of the characteristics of composite tile.
Kata kunci
Pembimbing 1
Pembimbing 2
Pembimbing 3
Tahun
Jumlah Halaman
Save