Artikel Ilmiah : G1G008044 a.n. BINTANG AYU RYZA PRATIWI
| NIM | G1G008044 |
|---|---|
| Namamhs | BINTANG AYU RYZA PRATIWI |
| Judul Artikel | PENGARUH VARIASI KONSENTRASI KITOSAN SEBAGAI COUPLING AGENT TERHADAP MIKROSTRUKTUR DAN KEKERASAN KOMPOSIT ZIRKONIA ALUMINA SILIKA APATIT HASIL SINTESIS |
| Abstrak (Bhs. Indonesia) | Komposit merupakan salah satu bahan restorasi direk dan dibentuk oleh tiga komponen utama yakni matriks, filler dan coupling agent. Saat ini banyak dikembangkan filler menggunakan bahan-bahan yang berasal dari alam seperti zirkonia alumina silika apatit. Penelitian ini bertujuan untuk membuktikan pengaruh konsentrasi kitosan yang paling baik sebagai coupling agent terhadap mikrostruktur dan kekerasan pada komposit zirkonia alumina silika apatit hasil sintesis dengan menggunakan variasi konsentrasi 2%, 4%, dan 6%. Metode penelitian yang digunakan adalah penelitian eksperimental laboratoris murni. Pembuatan sampel diawali dengan mensintesis filler zirkonia alumina silika apatit kemudian dibagi menjadi tiga kelompok dan masing-masing kelompok ditambah kitosan 2%, 4%, dan 6% sebagai coupling agent. Hasil SEM menunjukkan ukuran partikel sampel A: 197nm, B: 103 nm, C: 90 nm. Gambaran distribusi partikel sampel A dan B belum begitu merata, dan gambaran distribusi paling baik ditunjukkan pada sampel C. Hasil uji kekerasan yang diperoleh secara berurutan 17,30VHN; 20,46 VHN dan 29,02 VHN. Kesimpulan dari penelitian ini bahwa semakin tinggi konsentrasi kitosan yang ditambahkan pada komposit hasil sintesis maka semakin baik distribusi dan ukuran partikelnya serta semakin tinggi pula nilai kekerasannya. |
| Abtrak (Bhs. Inggris) | ABSTRACT Composite is one of the direct restoration materials and formed by the three main components that is matrix, filler, and coupling agent. Nowadays much filler developed by using the materials from nature such as zirconia alumia silica apatite. This study aimed to prove the effect of the best chitosan concentration as a coupling agent against the microstructure and the hardness of composite zirconia alumina silica apatite synthesized by using the concentration variation of 2%, 4%, and 6%. The method of this study using purely experimental laboratory research. Sample preparation started with synthesize the filler zirconia alumina silica apatite were then divided into three groups and each group added chitosan 2%, 4%, and 6% as a coupling agent. The results of SEM showed the particle size of sample A: 197nm, B: 103nm, C: 90nm. Particle distribution view of sample A and B are not spread evenly and the best distribution view showed in sample C. The hardness test results obtained sequentially 17,30 VHN; 20,46 VHN and 29,02 VHN. The conclusion of this study are that more higher chitosan concentration added to the composite synthesized so the better distribution and particle size also the higher the hardness values. |
| Kata kunci | Chitosan, coupling agent, zirconia alumina silica apatite, microstructure, hardness. |
| Pembimbing 1 | Prof. DR. Ir. Bambang Sunendar Purwasasmita, M. Eng. |
| Pembimbing 2 | DR. drg. A. Haris Budi Widodo, M.Kes., A.P., S.IP. |
| Pembimbing 3 | |
| Tahun | 2013 |
| Jumlah Halaman | 18 |
| Tgl. Entri | (belum diset) |