| NIM | H1C009061 |
| Namamhs | RHEZI SYAHPUTRA |
| Judul Artikel | PERANCANGAN PEMBANGKIT LISTRIK TENAGA SURYA SISTEM STAND ALONE KAPASITAS 900 WATT PEAK UNTUK RUMAH TINGGAL di PURWOKERTO
|
| Abstrak (Bhs. Indonesia) | PLTS merupakan pembangkit listrik alternatif yang memanfaatkan tenaga radiasi matahari dengan menggunakan sel surya sebagai pengkonversi energi matahari menjadi energi listrik. Salah satu tipe PLTS yang banyak diterapkan adalah sistem stand alone photovoltaic yang memiliki keuntungan independensi dalam memanfaatkan energi alternatif sebagai sumber pembangkit. Pada tugas akhir ini membahas perancangan yang tepat dalam memilih, menentukan kapasitas dan konfigurasi setiap komponen sistem PLTS dengan kapasitas fotovoltaik terpasang 900 Watt Peak. Perancangan sistem PLTS dilakukan dengan perhitungan, simulasi perangkat lunak Homer dan implementasi perancangan dilapangan. Pada perancangan ini diperoleh konfigurasi dari PLTS menggunakan perhitungan maupun simulasi menunjukan kesesuaian, yakni terdiri dari: 1) Tegangan kerja yang digunakan sebesar 48 V, 2) Jumlah modul Pv yang digunakan adalah 18 modul dengan kapasitas 48 Wp/modul, 3) Konfigurasi modul Pv array terdiri dari 3 seri dan 6 string, 4) Kapasitas baterai yang dibutuhkan untuk otonom day 1 hari dan 2 hari adalah 92,24 Ah dan 184 Ah dengan konfigurasi 8 baterai terhubung serie dan 8 baterai terhubung serie dengan 2 strin,g 5) Kapasitas converter yang diutuhkan 1,2 Kw terdiri dari charge controller dan inverter, berdasarkan konfigurasi yang dihasilkan menggunakan simulasi menunjukan bahwa sistem PLTS dengan otonom day 2 hari memiliki performansi yang jauh lebih baik dalam mensuplai beban dengan pengurangan kapasitas beban (shotage capacity) 0,01 %. Dalam implementasi PLTS sistem stand alone kapasitas 900 Watt Peak diperoleh bahwa besarnya energi yang dihasilkan sistem dipengaruhi oleh kondisi komponen, Insolasi matahari, efek shading yang diterima pv array, kapasitas baterai, dan beban yang disuplai sistem. |
| Abtrak (Bhs. Inggris) | Solar power plant is an alternative power plant which utilize solar radiation as it’s main source and a solar cell to convert the solar energy to become electricity. There is one type of solar energy power plant commonly used, it is stand alone photovoltaic type which have an advantage feature such as employing alternative energy as it’s source, independently. This paper describes a precise plan to choose, determine a power plant capacity and a configuration for every component of a solar power plant with 900 watt peak installed photovoltaic capacity. Calculation and simulation of a solar power plant design carried out with Homer software while it’s implementation done on the research field. The configuration of this design showed to be suitable with planned calculation and simulation. The suitable points are: 1) The working voltage in this design employed 48 V, 2) This design utilized 18 modules with 48 Wp/module capacity, 3) Pv array configuration carried out by 3 series and 6 string, 4) Battery capacity needed are 92.24 Ah for One Day Otonom and 184 Ah for Two Days Otonom with 8 series battery connected to 2 strings configuration, 5) A charge controller and an inverter utilized as converter which had 1.2 Kw capacity. Based on the simulated final configuration, 2 Days otonom solar power plant design showed better performance in load manipulation which resulted 0.01 % shortage capacity. During the implementation of the design, several factors such as component condition, solar insolation, shading effects on the Pv array, battery capacity and the load supplied by the system were effecting the amount of energy which generated by the power plant. |
| Kata kunci | Pembangkit Listrik Tenaga Surya (PLTS), Generator Fotovoltaik, Insolasi matahari, Baterai, Inverter, Solar charge controller, Perangkat Lunak HOMER, Pengujian sistemPLTS. |
| Pembimbing 1 | Dr. Eng. Suroso |
| Pembimbing 2 | Winasis, ST., M.Eng |
| Pembimbing 3 | |
| Tahun | 2013 |
| Jumlah Halaman | 13 |
| Tgl. Entri | (belum diset) |
|---|