Artikel Ilmiah : K1A022090 a.n. MUNAYA SABRINA AZMITA
| NIM | K1A022090 |
|---|---|
| Namamhs | MUNAYA SABRINA AZMITA |
| Judul Artikel | Pengaruh Variasi Massa Silika Abu Sekam Padi terhadap Karakteristik Bioplastik Berbasis Selulosa Asetat dan Gliserol |
| Abstrak (Bhs. Indonesia) | Bioplastik merupakan plastik yang dapat terdegradasi secara alami dibandingkan dengan plastic konvensional yang terbuat dari minyak bumi. Bahan yang dapat dijadikan untuk pembuatan bioplastik ialah selulosa asetat. Adanya asetil dan strukturnya yang kompleks menjadikan bahan ini memiliki ketahanan air dan panas yang lebih tinggi dibandingkan selulosa. Bioplastik bersama dengan pemlastis, seperti gliserol, dapat meningkatkan fleksibilitas. Silika dari abu sekam padi berperan sebagai pengisi dalam sistem bioplastik untuk meningkatkan performa bioplastik. Penelitian ini bertujuan untuk mengetahui pengaruh variasi massa silika abu sekam padi (0 (A); 0,1 (B); 0,2 (C); dan 0,3 g (D)) terhadap karakteristik bioplastik dan mengetahui komposisi optimal silika abu sekam padi dalam sintesis bioplastik berbasis selulosa asetat dan gliserol. Ekstraksi silika dari sekam padi menggunakan metode sol-gel dan diperoleh silika berwarna putih dengan sebagian fasa amorf. Hasil pengujian bioplastik diperoleh penambahan massa silika abu sekam padi ke dalam bioplastik menurunkan kuat tarik, yaitu 66,3 - 29,6 MPa, namun masuk ke dalam standar SNI 2014 dan JIS 2019. Ketebalan bioplastik optimum pada bioplastik B. Ketahanan air bioplastik optimum pada bioplastik D. Nilai kuat tarik tertinggi terletak pada bioplastik A. Penambahan 0,2 g silika abu sekam padi memaksimalkan nilai elongasi dan biodegradasi pada bioplastik. FTIR mengkonfirmasi integritas kimia selulosa asetat dan silika serta menunjukkan ketiadaan silanol setelah silika ditambahkan ke dalam bioplastik. Hasil SEM menunjukkan silika abu sekam padi meningkatkan domain partikel dan agregasi, sedangkan gliserol meningkatkan dispersi dan keseragaman permukaan. |
| Abtrak (Bhs. Inggris) | Bioplastic is a plastic that can be naturally degraded compared to conventional plastics made from petroleum. The material that can be used as a material for making bioplastic is cellulose acetate. The presence of acetyl and its complex structure makes this material have higher air and heat resistance than cellulose. Bioplastic together with plasticizers, such as glycerol, can increase flexibility. Silica from rice husk ash acts as a filler in the bioplastic system to improve the performance of bioplastics. This study aims to determine the variation in the effect of rice husk ash silica mass (0 (A); 0.1 (B); 0.2 (C); and 0.3 g (D)) on the characteristics of bioplastics and to determine the optimal composition of rice husk ash silica in the synthesis of cellulose acetate and glycerol-based bioplastics. Silica extraction from rice husks using the sol-gel method and obtained white silica with some amorphous phases. Bioplastic testing results showed that the addition of silica mass from rice husk ash to the bioplastic reduced the tensile strength, namely 66.3 - 29.6 MPa, but it was within the SNI 2014 and JIS 2019 standar. The optimum thickness of the bioplastic was in bioplastic B. The optimum air resistance of the bioplastic was in bioplastic D. The highest tensile strength value was found in bioplastic A. The addition of 0.2 g of silica from rice husk ash maximized the elongation and biodegradation values in the bioplastic. FTIR confirmed the chemical integrity of cellulose acetate and silica and showed the absence of silanols after silica was added to the bioplastic. SEM results showed that silica from rice husk ash increased particle domain and aggregation, while glycerol increased dispersion and surface uniformity. |
| Kata kunci | Bioplastic, Cellulose Acetate, Glycerol, Silica, Rice Husk |
| Pembimbing 1 | Dra. Eva Vaulina Yulistia Delsy, M.Si. |
| Pembimbing 2 | Dwi Kartika, S.Si., M.Sc. |
| Pembimbing 3 | |
| Tahun | 2026 |
| Jumlah Halaman | 113 |
| Tgl. Entri | 2026-08-04 10:17:48.991268 |