| NIM | K1A021035 |
| Namamhs | AGUNG BUDIYONO WONGSO |
| Judul Artikel | DEPOLIMERISASI KATALITIK LIGNIN MENJADI MONOMER AROMATIK DENGAN KATALIS Ni BERPENYANGGA MgO-Al2O3 |
| Abstrak (Bhs. Indonesia) | Lignin merupakan salah satu komponen lignoselulosa pada tumbuhan yang sering dianggap sebagai limbah dan tidak bersaing dengan bahan konsumsi manusia. Proses depolimerisasi lignin bertujuan untuk memutus ikatan C–O maupun C–C dalam strukturnya yang kompleks, sehingga dapat menghasilkan senyawa aromatik, hidrokarbon, dan turunannya yang berpotensi digunakan dalam produksi bahan kimia. Penelitian ini berfokus pada depolimerisasi lignin menjadi monomer-monomernya melalui metode hidrogenolisis dengan katalis berbasis logam nikel berpenyangga oleh MgO-Al2O3 guna meningkatkan efektivitas produk yang dihasilkan. Katalis disintesis menggunakan penyangga Al2O3 yang diperoleh dari aluminium isopropoksida dengan penambahan Pluronic F127 sebagai agen pembentuk pori yang kemudian didoping menggunakan MgO dan Ni dari garam hidratnya. Katalis ini memiliki karakteristik meliputi luas permukaan tertinggi pada variasi penambahan 5% MgO sebesar 150,8 m2/g, sementara ukuran pori mengalami penurunan seiring dengan penambahan rasio MgO dari 15,8 nm menjadi 9,99 nm, menunjukkan bahwa katalis ini memiliki struktur mesopori. Peningkatan rasio MgO juga menyebabkan peningkatan ukuran kristalnya dari 3,91 menjadi 9,81 nm. Katalis tersebut memiliki angka keasaman dan kebasaan tertinggi pada variasi penambahan 5% MgO sebesar 1,4808 m2/g dan 1,2547 m2/g. Variasi Ni/5%MgO-Al2O3 menunjukkan konversi tertinggi sebesar 28%. Yield produk aromatik dan ester tertinggi pada variasi Ni/10%MgO-Al2O3 sebesar 15,93% dan 1,21%. Sedangkan, yield produk alifatik rantai panjang tertinggi pada variasi Ni/20%MgO-Al2O3 sebesar 1,58%. Hasil ini menunjukkan bahwa katalis Ni/MgO-Al2O3 efektif dalam depolimerisasi lignin, dengan pengaruh signifikan terhadap selektivitas produk yang dihasilkan.
|
| Abtrak (Bhs. Inggris) | Lignin is one of the lignocellulosic components in plants that is often considered as waste and does not compete with human consumption materials. The depolymerization process of lignin aims to break the C–O and C–C bonds in its complex structure, so as to produce aromatic compounds, hydrocarbons, and their derivatives that can potentially be used in chemical production. This research focuses on the depolymerization of lignin into its monomers through the hydrogenolysis method with a nickel metal-based catalyst buffered by MgO-Al2O3 to increase the effectiveness of the products produced. The catalyst was synthesized using Al2O3 buffer obtained from aluminum isopropoxide with the addition of Pluronic F127 as a pore forming agent which was then doped using MgO and Ni from its hydrate salt. This catalyst has characteristics including the highest surface area in the variation of 5% MgO addition of 150.8 m2/g, while the pore size decreased along with the addition of MgO ratio from 15.8 nm to 9.99 nm, indicating that this catalyst has a mesoporous structure. Increasing the MgO ratio also led to an increase in the size of the kirstal from 3.91 to 9.81 nm. The catalyst has the highest acidity and basicity numbers in the variation of 5% MgO addition of 1.4808 m2/g and 1.2547 m2/g. The Ni/5%MgO-Al2O3 variation showed the highest conversion of 28%. The highest yield of aromatic and ester products in the Ni/10%MgO-Al2O3 variation was 15.93% and 1.21%. Meanwhile, the yield of long-chain aliphatic products was highest in the Ni/20%MgO-Al2O3 variation at 1.58%. These results indicate that Ni/MgO-Al2O3 catalyst is effective in lignin depolymerization, with a significant influence on the selectivity of the products produced.
|
| Kata kunci | Lignin, depolimerisasi, katalis Ni/MgO-Al2O3, mesopori. |
| Pembimbing 1 | Prof. Uyi Sulaeman, S.Si., M.Si., Ph.D. |
| Pembimbing 2 | Adid Adep Dwiatmoko, S.T., Ph.D. |
| Pembimbing 3 | |
| Tahun | 2025 |
| Jumlah Halaman | 120 |
| Tgl. Entri | 2025-06-02 09:45:43.567201 |
|---|