| NIM | H1E014037 |
| Namamhs | ROLASMATUA MANIK |
| Judul Artikel | RANCANG BANGUN ALAT UKUR RESISTIVITAS BAHAN PADAT DENGAN METODE FOUR POINT PROBE |
| Abstrak (Bhs. Indonesia) | Penelitian rancang bangun alat ukur resistivitas bahan padat telah dilakukan. Metode yang digunakan dalam penelitian ini adalah Metode Four point probe. Metode ini menggunakan empat buah probe dimana dua buah probe sebagai probe arus dan dua probe lainnya sebagai probe tegangan. Probe arus dan tegangan disusun secara sejajar dengan jarak antar probe sebesar 1 cm. Alat ukur resistivitas yang telah dirancang menggunakan dua buah multimeter yang difungsikan sebagai amperemeter dan voltmeter. Pengukuran nilai resistivitas pada beberapa bahan telah dilakukan yaitu Plat Stainless =74,12x〖10〗^(-8) Ωm, Plat Timah =21,44x〖10〗^(-8) Ωm, Plat Alumunium =2,62x〖10〗^(-8) Ωm dan Tanah Pasir (15% Air) =96,65 Ωm. Nilai akurasi alat ukur yang telah dirancang adalah sebesar 95,35 % dan error sebesar 4,65 %. |
| Abtrak (Bhs. Inggris) | The research into the design of solid material resistivity measuring equipment has been done. The method used in this research is the Four point probe Method. This method uses four probes which are two probes as a current probe and two other probes as the voltage probe. The current and voltage probe are arranged in parallel with the distance between the probe by 1 cm. The resistivity gauge has been designed using two multimeter pieces that serve as ammeters and voltmeters. Measurement of resistivity value in some materials has been done namely Stainless Plate =74,12x〖10〗^(-8) Ωm, Tin Plate =21,44x〖10〗^(-8) Ωm, Aluminum Plate =2,62x〖10〗^(-8) Ωm and Sand (15% Water) = 96,65 Ωm. The accuracy of the measuring instrument has been measured to be 95.35% and an error of 4.65%. |
| Kata kunci | Resistivitas, Akurasi, Metode four point probe |
| Pembimbing 1 | Dr. Abdullah Nur Aziz, M.Si |
| Pembimbing 2 | Hartono, M.Si |
| Pembimbing 3 | |
| Tahun | 2019 |
| Jumlah Halaman | 34 |
| Tgl. Entri | 2019-10-28 14:54:25.65981 |
|---|