Artikel Ilmiah : H1C014047 a.n. ADHIKA DWI RACHMANTO
| NIM | H1C014047 |
|---|---|
| Namamhs | ADHIKA DWI RACHMANTO |
| Judul Artikel | SISTEM KENDALI KECEPATAN LIFT 4 LANTAI DENGAN 3 LEVEL KECEPATAN DILENGKAPI EMERGENCY POWER BACKUP BERBASIS PLC DAN MONITORING HMI |
| Abstrak (Bhs. Indonesia) | Pembangunan gedung pencakar langit dengan lantai yang semakin tinggi membutuhkan teknologi pendukung berupa building automation system yang semakin canggih. Jumlah lantai yang semakin banyak memerlukan sistem transportasi vertikal yang efisien karena semakin tinggi lantai yang dituju akan membutuhkan waktu yang semakin lama untuk mencapainya. Pada penelitian ini dibuat suatu sistem pengendali kecepatan lift berdasarkan lantai tujuan untuk mengefisienkan waktu tempuh lift terutama untuk menuju lantai-lantai puncak. Selain itu dirancang pula sistem keamanan berupa maksimum penumpang yang dapat menaiki lift dan juga sistem keamanan saat listrik padam. HMI dirancang untuk sistem lift ini sehingga mempermudah pemantauan dan pengendalian sistem lift dari ruang kendali. Perancangan ladder diagram menggunakan software GX Developer sedangkan untuk merancang HMI digunakan software CitectSCADA. Pengendalian kecepatan lift menggunakan parameter jarak lantai. Pada penelitian ini digunakan tiga level kecepatan yaitu 100%, 60%, dan 30%. Sistem keamanan penumpang maksimum menggunakan masukan dari sensor photodiode yang akan mendeteksi penumpang yang masuk dan keluar. Sistem keamanan saat listrik padam bekerja dengan memanfaatkan sumber tenaga cadangan untuk menggerakkan kabin ke lantai terdekat. Setelah rancangan sistem kendali kecepatan lift ini diaplikasikan ke modul lift 4 lantai didapatkan waktu tempuh yang lebih singkat terutama untuk jarak tempuh yang jauh, yaitu pada jarak tempuh 2 lantai dari 14,03 detik menjadi 10,47 detik, serta pada jarak tempuh 3 lantai dari 20,60 detik menjadi 12,70 detik. Sistem juga menjadi lebih baik dalam aspek keselamatan penumpang dengan memberikan batas maksimal sebanyak 13 penumpang dalam pengoperasian lift dan sistem tetap dapat bekerja saat pemadaman listrik dengan menggunakan sistem catu daya cadangan. Penggunaan HMI mempermudah pemantauan sistem secara realtime untuk melihat parameter kecepatan, jumlah penumpang, serta catu daya yang sedang digunakan. |
| Abtrak (Bhs. Inggris) | Construction of skyscrapers with higher floors level requires supporting technology in the form of a sophisticated building automation system. An increasing number of floors require an efficient vertical transport system as the higher the intended floor will take longer to reach. In this study a system of elevator speed control made based on the floor of destination to streamline the travel time of the elevator, especially to the top floors. In addition, security system is also designed in the form of maximum passengers who can enter the elevator and also the security system when the power failures to improve the safety and comfort of passenger elevators. HMI is designed for this elevator system, making it easier to monitor and control the elevator system from the control room. The design of the ladder diagram uses the GX Developer software, while the CitectSCADA software is used to design the HMI. Elevator speed control using the parameters of the floor distance. In this research, three levels of speed are used, that is 100%, 60%, and 30%. The maximum passenger security system uses input from the photodiode sensor that will detect incoming and outgoing passengers. The security system when the power failures work by utilizing the backup power source to move the cabin to the nearest floor. After the design of the elevator speed control system was applied to the 4-floor elevator module, the travel time was shorter, especially for the far distance, i.e. on the distance of 2 floors from 14.03 seconds to 10.47 seconds, and on 3-mile distance from 20.60 seconds to 12.70 seconds. The system also gets better in the aspect of passenger safety by providing a maximum limit of 13 passengers in the elevator operation and the system can still work during a power outage using an emergency power backup system. The use of HMI facilitates realtime system monitoring to see the speed parameters, the number of passengers, and the power supply being used. |
| Kata kunci | PLC, HMI, kendali kecepatan, sistem keamanan, elevator |
| Pembimbing 1 | Priswanto, S.T., M.Eng. |
| Pembimbing 2 | Farida Asriani, S.Si., M.T. |
| Pembimbing 3 | |
| Tahun | 2018 |
| Jumlah Halaman | 11 |
| Tgl. Entri | 2018-08-20 08:39:43.401865 |