Artikel Ilmiah : H1C014029 a.n. AZHAR MUJAHID
| NIM | H1C014029 |
|---|---|
| Namamhs | AZHAR MUJAHID |
| Judul Artikel | ANALISIS KOORDINASI KERJA PMT (PEMUTUS TENAGA) DENGAN RECLOSER AKIBAT GANGGUAN ARUS HUBUNG SINGKAT PADA PENYULANG PURBALINGGA-5 PT. PLN (PERSERO) AREA PURWOKERTO RAYON PURBALINGGA |
| Abstrak (Bhs. Indonesia) | Di tahun 2017 penyulang Purbalingga-5 di Gardu Induk Purbalingga sudah trip sebanyak 6 kali dengan durasi padam rata-rata mencapai 30 menit. Sedangkan target dari PLN Area Purwokerto untuk SAIFI yaitu 7,43 kali/pelanggan/tahun dan SAIDI yaitu 323,95 menit/pelanggan/tahun. Hal ini menandakan bahwa keandalan yang kurang baik pada sistem koordinasi relai di penyulang Purbalingga-5. Sistem koordinasi relai berhubungan dengan waktu kerja dari relai khususnya PMT outgoing dan recloser. Untuk mengetahui waktu kerja relai maka diperlukan perhitungan arus nominal trafo, reaktansi sumber, reaktansi trafo, impedansi dan arus hubung singkat. Dari perhitungan arus hubung singkat didapatkan nilai Ihs terbesar yaitu 9518 A dan terkecil yaitu 446 A. Dari nilai arus hubung singkat, selanjutnya dapat dihitung waktu kerja dan Δt dari PMT outgoing dan recloser. Dari koordinasi PMT outgoing dan recloser didapat Δt yang belum sesuai dengan standar PLN yaitu 0,4 detik. Untuk menyesuaikan dengan standar PLN dibutuhkan pengaturan ulang nilai tms menjadi 0,31 untuk PMT outgoing; 0,1 untuk recloser 1 dan 0,022 untuk recloser 2. Dengan nilai tms yang baru maka Δt sudah mencapai 0,4 detik. Sehingga dengan nilai Δt = 0,4 detik relai akan berkoordinasi lebih baik. |
| Abtrak (Bhs. Inggris) | In 2017 Purbalingga-5 feeder in Purbalingga electrical substation has occured trip as many as 6 times a day with duration extinguished an average of 30 minutes. The targets of PLN Purwokerto to SAIFI are 7,43 times / customers / year and SAIDI are 323,95 minutes / customers / year. This indicates a weakness in the reliability of the work coordination relay on the Purbalingga-5 feeder. The working coordination of the relay is related to the work time of outgoing CB and recloser. To determine the relay working time it is necessary to calculate the nominal current flow, source reactance, transformer reactance, impedance and short circuit current. From the calculation of short circuit current obtained the largest Ihs value is 9518 A and the smallest is 446 A. From the short circuit current value, the working time and Δt from outgoing CB and recloser can be calculated. The calculation result of Δt is not in accordance with PLN standard which value is 0.4 second. To adjust to the PLN standard, tms is required to be 0.31 for outgoing CB; 0.1 for recloser 1 and 0.022 for recloser 2. With the new tms value, Δt has reached 0.4 seconds. So with the value of Δt = 0.4 seconds the relays will coordinate better. |
| Kata kunci | recloser, PMT outgoing, koordinasi relai |
| Pembimbing 1 | Daru Tri Nugroho, S.T., M.T. |
| Pembimbing 2 | Eko Murdyantoro, S.T., M.T. |
| Pembimbing 3 | |
| Tahun | 2018 |
| Jumlah Halaman | 10 |
| Tgl. Entri | 2018-05-18 13:10:32.062583 |