Artikel Ilmiah : H1E011001 a.n. AZIZ AHMAD
| NIM | H1E011001 |
|---|---|
| Namamhs | AZIZ AHMAD |
| Judul Artikel | DESAIN KOLIMATOR PADA SISTEM SIKLOTRON SEBAGAI SUMBER NEUTRON UNTUK BORON NEUTRON CAPTURE THERAPY MENGGUNAKAN MCNPX |
| Abstrak (Bhs. Indonesia) | Telah dilakukan penelitian tentang kolimator neutron untuk fasilitas Boron Neutron Capture Therapy (BNCT) dengan sumber neutron yang berbasiskan reaksi 9Be(p,n)9B menggunakan perangkat lunak Monte Carlo N-Particle X (MCNPX). Berkas proton yang digunakan pada reaksi tersebut memiliki arus 1,1 mA dan bersifat monodirectional serta monoenergetic dengan energi 30 MeV. Spesifikasi dimensi dari setiap komponen kolimator divariasikan untuk mendapatkan desain yang dapat menghasilkan berkas neutron yang optimal mengacu pada kriteria International Atomic Energy Agency (IAEA). Simulasi menunjukan bahwa spesifikasi dimensi kolimator neutron yang optimal adalah target 9Be dengan panjang 1,4 cm dan jari-jari 0,5 cm, dinding target dengan material timbal sepanjang 72 cm, filter neutron termal berupa 56Fe dengan panjang 0,6 cm dan jari-jari 5 cm serta LiF sepanjang 0,2 cm dan jari-jari 5 cm, moderator MgF2 dengan panjang 20 cm dan jari-jari 5 cm, moderator air berat dengan panjang 26,2 cm dan jari-jari 5 cm. Berkas neutron yang dihasilkan memiliki fluks neutron epitermal 3,84 × 109 neutron cm-2 s-1, dosis neutron cepat tiap fluks neutron epitermal 7,39 × 10-13 Gy cm2 s neutron-1, dosis gamma tiap fluks neutron epitermal 3,64 × 10-12 Gy cm2 s neutron-1, rasio fluks neutron termal terhadap fluks neutron epitermal 0, rasio arus neutron epitermal terhadap total fluks neutron epitermal 0,759. Parameter dosis neutron cepat tiap fluks neutron epitermal dan dosis gamma tiap fluks neutron epitermal belum memenuhi kriteria IAEA yaitu kurang dari 2 × 10-13 Gy cm2 s neutron-1. Namun masih berada pada batas toleransi IAEA yaitu kurang dari 13 × 10-13 Gy cm2 s neutron-1. |
| Abtrak (Bhs. Inggris) | A research of neutron collimator design using Monte Carlo N-Particle X (MCNPX) software for the Boron Neutron Capture Therapy (BNCT) facility with a neutron source based on 9Be(p, n)9B reaction has been conducted. Proton beam that is used in the reaction has a current of 1.1 mA and has properties which are monodirectional and monoenergetic with energy of 30 MeV. Dimensional specifications of each collimator’s component are varied to obtain a design that can produce optimal neutron beam refers to the criteria of the International Atomic Energy Agency (IAEA). Simulations show that the optimal dimensional specifications of neutron collimator are 9Be targets with a length of 1.4 cm and 0.5 cm radius, the target wall based on lead material with 72 cm length, a thermal neutron filter in the form of 56Fe with a length of 0.6 cm and 5 cm radius and LiF with a length of 0,2 cm and 5 cm radius, MgF2 moderator with a length of 20 cm and 5 cm radius, heavy water moderator with a length 26,2 cm and 5 cm radius. The resulting neutron beam has 3,84 × 109 neutron cm-2 s-1 epithermal neutron flux, 7,39 × 10-13 Gy cm2 s neutron-1 fast neutron dose every epithermal neutron flux, 3,64 × 10-12 Gy cm2 s neutron-1 gamma dose each epithermal neutron flux, 0 ratio of the thermal neutron flux to the epithermal neutron flux, 0.759 ratio of epithermal neutrons current to the total epithermal neutron flux. Fast neutron doses each epithermal neutron flux and gamma dose every epithermal neutron flux parameters has not met the IAEA’s criteria of less than 2 × 10-13 Gy cm2 s neutron-1. However, for gamma dose every epithermal neutron flux parameter is still within the limits of tolerance of the IAEA which is less than 13 × 10-13 Gy cm2 s neutron-1. |
| Kata kunci | kolimator neutron, BNCT, MCNPX, reaksi 9Be(p,n)9B, kriteria IAEA |
| Pembimbing 1 | Bilalodin, S.Si., M.Si. |
| Pembimbing 2 | Aris Haryadi, S.Si., M.Si. |
| Pembimbing 3 | |
| Tahun | 2016 |
| Jumlah Halaman | 41 |
| Tgl. Entri | 2016-04-27 16:48:17.820113 |