Artikel Ilmiah : H1C010068 a.n. DESTIAN DWI SUSETYO
| NIM | H1C010068 |
|---|---|
| Namamhs | DESTIAN DWI SUSETYO |
| Judul Artikel | ANALISIS PERBAIKAN PROFIL TEGANGAN PADA FEEDER LOMANIS 01 (LMS 01) JARINGAN DISTRIBUSI TEGANGAN MENENGAH 20KV PT. PLN (PERSERO) APJ CILACAP DENGAN METODE PEMASANGAN KAPASITOR BANK |
| Abstrak (Bhs. Indonesia) | Pada dasarnya saat penyaluran tenaga listrik sampai ke konsumen akan timbul adanya permasalahan profil tegangan berupa drop tegangan dan losses yang tidak sesuai dengan peraturan yang ditetapkan. Penelitian ini bertujuan untuk mengetahui nilai profil tegangan pada feeder lomanis 01 APJ Cilacap untuk kemudian dilakukan perbaikan agar nantinya sesuai dan tetap terjaganya profil tegangan dalam batas toleransi yang diperbolehkan sesuai dengan SPLN 1 : 1995, yaitu nilai maksimum +5% dan minimum -10% dari tegangan nominal yaitu 20kV dengan metode pemasangan kapasitor bank menggunakan software ETAP power station 7.5.0. Analisis perbaikan dilakukan dengan beberapa uji pemasangan, yaitu pemasangan kapasitor bank dengan nilai daya reaktif sebesar 2,33 Mvar pada bus 3 sampai pemasangan pada bus 7 yang dilakukan secara bergantian, dan berdasarkan rata-rata drop tegangan terkecil setelah dilakukan pemasangan kapasitor didapatkan penempatan paling optimal yaitu pemasangan pada bus 7 atau bus ujung feeder. Dengan drop tegangan sebelum dilakukan pemasangan sebesar 7,510 % menjadi 3,655 % setelah dilakukan pemasangan pada bus 7 dan Losses pada kondisi sebelum dilakukan pemasangan sebesar 189,3 kW menjadi 143,7 kW setelah pemasangan pada bus 7. Dengan demikian kondisi profil tegangan feeder Lomanis 1 ini lebih baik setelah dilakukan pemasangan kapasitor bank pada bus 7. |
| Abtrak (Bhs. Inggris) | Basically when the distribution of electricity power to consumers will arise the voltage profile problem such as drop voltage and losses which are not in accordance with the regulations. This study aims to determine the value of the voltage profile in the feeder Lomanis 01 APJ Cilacap, then repaired is need in order to keep balance and remain maintained of voltage profile within the tolerance limits permitted in accordance with SPLN 1: 1995, which is the maximum value at + 5% and minimum at -10% From the nominal voltage 20kV. With applied Capacitor bank using ETAP software of power station 7.5.0. Analysis of repairing is carried out with several test installation, the installation of capacitor banks with a value at 2.33 MVAR reactive power at bus 3 to the installation of the bus 7 are performed with exchanging, and based on the average smallest drop voltage after installing the capacitor it’s obtained the most optimal placement in the bus 7 or bus feeder tip. With a drop voltage before the installation is 7.510% to 3.655% after installing in the bus 7 and Losses on the condition before to the installation is 189.3 kW to 143.7 kW after the installation in the bus 7. Finally Thus condition of feeder voltage profile Lomanis 1 is going better after the installation of bank capacitor is applied on the bus 7. |
| Kata kunci | Drop tegangan, Kapasitor bank, Losses, Profil tegangan |
| Pembimbing 1 | Daru Tri Nugroho S.T.,M.T |
| Pembimbing 2 | Dr. Eng. Suroso, S.T.,M.Eng |
| Pembimbing 3 | |
| Tahun | 2015 |
| Jumlah Halaman | 11 |
| Tgl. Entri | 2015-10-26 21:53:50.93238 |