Home
Login.
Artikelilmiahs
48781
Update
NAFLAH BALQIS PRAMESTI SUNJAYA
NIM
Judul Artikel
SINTESIS DAN KARAKTERISASI STANNIC OXIDE (SnO₂) TERMODIFIKASI SEBAGAI ANODA BATERAI LITIUMSINTESIS DAN KARAKTERISASI STANNIC OXIDE (SnO2) TERMODIFIKASI SEBAGAI ANODA BATERAI LITIUM
Abstrak (Bhs. Indonesia)
Stannic oxide (SnO2) memiliki kapasitas teoritis sebesar 782 mAh/g, menjadikannya kandidat material anoda untuk baterai ion litium. Namun, konduktivitas yang rendah dan ekpansi volume selama siklus membatasi penggunaannya. Dalam penelitian ini, SnO₂ dikonversi dari logam timah murni melalui degradasi dengan NaOH dan oksidasi termal pada 900°C, lalu dimodifikasi dengan karbon. Karakterisasi XRD menunjukkan bahwa Sn900:Porous memiliki struktur kristalin rutil tanpa puncak karbon terdeteksi, menunjukkan karbon bersifat amorf. Raman menunjukkan puncak D dan G pada 1350 cm⁻¹ dan 1580 cm⁻¹ dengan rasio ID/IG sebesar 1,15. SEM menunjukkan morfologi berpori dan aglomerasi partikel SnO2. Uji CV menunjukkan bahwa Sn900:P menghasilkan puncak redoks pada 0,06 V, 0,53 V, 0,6 V, 0,68 V, 0,87 V, dan 1,35 V, menunjukkan proses interkalasi Li⁺, reduksi Sn⁴⁺ menjadi Sn⁰, dan oksidasi bertahap. Intensitas arus redoks lebih tinggi dan stabil dibandingkan SnO₂ murni. EIS menunjukkan Rs meningkat dari 4,94 Ω menjadi 5,79 Ω, Rct menurun dari 278 Ω menjadi 202 Ω, dan terbentuknya lapisan SEI dengan RSEI sebesar 46,1 Ω pada Sn900:P.
Abtrak (Bhs. Inggris)
Stannic oxide (SnO₂) has a theoretical capacity of 782 mAh/g, making it a candidate anode material for lithium-ion batteries. However, its low conductivity and volume changes during cycling limit its usage. In this study, SnO₂ was converted from pure tin metal through degradation with NaOH and thermal oxidation at 900°C, followed by modification with carbon. XRD characterization showed that Sn900:Porous has a rutile crystalline structure with no detected carbon peaks, indicating that the carbon is amorphous. Raman spectroscopy revealed D and G peaks at 1350 cm⁻¹ and 1580 cm⁻¹ with an ID/IG ratio of 1.15. SEM showed a porous morphology and agglomeration of SnO₂ particles. CV testing indicated that Sn900:P produced redox peaks at 0.06 V, 0.53 V, 0.6 V, 0.68 V, 0.87 V, and 1.35 V, demonstrating the intercalation of Li⁺, reduction of Sn⁴⁺ to Sn⁰, and gradual oxidation. The intensity of the redox current was higher and more stable compared to pure SnO₂. EIS showed that Rs increased from 4.94 Ω to 5.79 Ω, Rct decreased from 278 Ω to 202 Ω, and the formation of an SEI layer with an RSEI of 46.1 Ω on Sn900:P.
Kata kunci
Pembimbing 1
Pembimbing 2
Pembimbing 3
Tahun
Jumlah Halaman
Save